Overview
The K&N 57-2542 is a cold air intake kit for the 1988–1995 Ford Bronco, 1988–1995 Ford F-150 and 1989 Ford F-250. It uses a partial enclosure filter housing and a washable, reusable oil-type filter mounted on a high density polyethylene tube.
It replaces the stock airflow assembly, taking in the filter, air box and air path. The estimated gain is 9 HP, and the intake is covered by the Million Mile Warranty.
Key features
- Partial enclosure filter housing
- Cold air intake design with a free-flowing tube
- Washable, reusable oil-type air filter
- Estimated gain of 9 HP, guaranteed by K&N to increase horsepower
- Inlet tube included
- Covered by the Million Mile Warranty
- Made in the U.S.A., 50-state legal under CARB E.O. # D-269-28
Older engines and aging parts
Intake kits for trucks from the late 1980s and early 1990s go onto engines that may have worn components. Before swapping the airflow system, look at the throttle body, the idle air control and the hoses that run to the intake. Worn parts can cause rough idle or vacuum leaks that an intake change will not fix.
Air filter care matters on older trucks. An oil-type washable filter needs regular cleaning and re-oiling, and it should be checked more often in dusty conditions. Keep the factory air box and filter if they are in good condition, so the original setup is available for a return to stock.
- Inspect vacuum hoses and clamps
- Check the throttle body for carbon buildup
- Clean the element on a set schedule
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-2542 |
| UPC | 24844109200 |
| Intake type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil (washable, reusable) |
| Inlet tube | Included |
| Tube material | High density polyethylene |
| Estimated horsepower gain | 9 HP |
| CARB E.O. number | D-269-28 (50-state legal) |
| Warranty | Million Mile Warranty |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1988–1995 Ford Bronco in Custom, Eddie Bauer, XL, XLT, XLT Lariat, XLT Nite and XLT Sport trims; the 1988–1995 Ford F-150 in Custom, Eddie Bauer, Special, XL, XLT and XLT Lariat trims; and the 1989 Ford F-250 in Custom, XL and XLT Lariat trims.
Years outside 1988–1995 for the Bronco and F-150, and years other than 1989 for the F-250, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
K&N puts typical installation time for this kit at 90 minutes or less. Since the kit replaces the stock filter, air box and air path, the factory assembly has to come out before the included inlet tube goes in, so allow time for that step and work with the engine cool.
What’s included
The kit includes the inlet tube and the K&N air filter.









