Overview
The K&N 57-3026 is a 57 Series cold air intake kit for 1988–1995 Chevrolet and GMC full-size pickups and SUVs. It fits C and K series 1500, 2500 and 3500 trucks, the Suburban, the 1992–1994 Chevrolet Blazer, the 1995 Chevrolet Tahoe and the 1992–1995 GMC Yukon. It also fits a 1989 GMC R2500.
K&N’s own wording is that the intake will increase horsepower with a guarantee, and it estimates the gain at 7 HP. The kit pairs a cold air intake type with a partial enclosure housing and a free-flowing high density polyethylene tube. The oil filter is washable and reusable.
Key features
- Cold air intake type
- Partial enclosure filter housing
- Free-flowing high density polyethylene tube
- Washable and reusable lifetime oil air filter
- Estimated gain of 7 HP (K&N estimate)
- Made in the U.S.A.
- Covered by the K&N Million Mile Warranty
Before you install
A cold air intake draws air from outside the engine bay, where it is usually cooler and denser than the air under the hood. Denser air supports more complete combustion, which is why intakes like this one are common on trucks that run heavy loads or hot climates. The gain depends on the engine, the rest of the air path and how the truck is driven, so treat any single figure as a rough guide.
The filter in this kit is oil-wetted, so it needs periodic cleaning and re-oiling rather than replacement at each service. Check the tube and clamps for cracks or loose fittings after the first few drives, and keep the filter clear of dust and water when washing the truck. Fitment varies across many trim and engine combinations, so review the year, model and engine before buying parts for the install.
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-3026 |
| UPC | 24844088680 |
| Intake type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil |
| Inlet tube | Included |
| Fitment type | Direct fit |
| Estimated gain | 7 HP (K&N estimate) |
| Country of manufacture | Made in the U.S.A. |
| CARB E.O. number | D-269-17 |
| Warranty | K&N Million Mile Warranty |
Vehicle fitment
The kit fits 1988–1995 Chevrolet C1500, C2500, C3500, K1500, K2500 and K3500 trucks and GMC C and K trucks in Base, Cheyenne, Scottsdale, Silverado, Sierra and related trims. Suburban models fit 1992–1995, and the Blazer, Tahoe and Yukon fit in the trims shown for each model.
Model years outside 1988–1995 are not covered. The 1989 GMC R2500 is the only R-series fit. Before ordering, confirm the year, model and trim against this list.
Installation notes
This kit covers many trucks, so match your year, model and engine before starting. A typical install takes about 90 minutes. Disconnect the battery before removing any intake component.
What’s included
The inlet tube and the washable K&N filter are included. Check the package contents against your installation before starting.









