Overview
The K&N Filter 57 Series Performance Air Intake Kit, part number 57-3058, is a cold air intake that replaces the factory air filter and air intake housing on selected 2007–2008 Cadillac Escalade, Chevrolet Avalanche, Silverado 1500, Suburban 1500 and Tahoe, and GMC Sierra 1500, Yukon and Yukon XL 1500 models. K&N designs the intake to reduce restriction by smoothing and straightening airflow, so the engine can take in more air than the stock assembly allows.
The kit pairs a free-flowing tube with a chrome-topped high-flow filter of the oil type and a heat shield that fills the former air box space. Air is routed past the mass air sensor into the throttle body. The filter can be used for up to 100,000 miles before servicing, depending on driving conditions, and the kit is 50 State Legal.
Key features
- Replaces the factory air filter and air intake housing
- Smooths and straightens airflow to reduce intake restriction
- Aerodynamically engineered intake tube routes air past the mass air sensor
- Chrome-topped K&N high-flow air filter that can be washed and reused
- Heat shield installs in the previous air box space
- Filter service interval of up to 100,000 miles, depending on driving conditions
- Covered by the K&N Million Mile Limited Warranty
Routine care for a large filter
An oversized filter gives long service intervals, but it still needs attention. Driving on dusty trails or in heavy pollen can load the filter faster than normal driving, so a visual check at each oil change is a good habit. When inspecting, look for dirt that has worked past the filter edges and for any tears in the pleats.
Because the heat shield fills the former air box space, check that it sits flat and does not rest against hot parts or wiring. After reinstalling the tube, make sure the mass air sensor connector is fully latched. Small gaps at the throttle body joint are worth correcting before they become a vacuum leak.
- Inspect the filter edges at each oil change
- Recheck the tube clamps after the first drives
- Keep the heat shield clear of hoses and wiring
- Clean the filter after off-road use
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-3058 |
| UPC | 24844232434 |
| Product line | K&N 57 Series Performance Air Intake Kit |
| Intake type | Cold Air |
| Filter housing type | Partial Enclosure |
| Filter type | Oil |
| Inlet tube | Included |
| Fitment | Direct Fit |
| Filter service interval | Up to 100,000 miles, depending on driving conditions |
| CARB E.O. number | D-269-37 |
| Warranty | K&N Million Mile Limited Warranty |
| Made in | The U.S.A. |
Vehicle fitment
Cadillac Escalade (Base, Platinum), Escalade ESV (Base, Platinum) and Escalade EXT (Base) for 2007–2008; Chevrolet Avalanche (LS, LT, LTZ); Chevrolet Silverado 1500 (LS, LT, LTZ, WT); Chevrolet Suburban 1500 (LS, LT, LTZ, Z71); Chevrolet Tahoe (LS, LT, LTZ); GMC Sierra 1500 (Denali, SL, SLE, SLT, WT); GMC Sierra 1500 Classic (SLE, SLT) for 2007; GMC Yukon (Denali, SLE, SLT); and GMC Yukon XL 1500 (Denali, SLE, SLT).
The list does not include Silverado, Sierra or Suburban 2500 and 3500 HD models, or any model year after 2008. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit uses the existing factory mounting points and is usually installed in 90 minutes or less. Tools needed are pliers, a screwdriver, a ratchet set and several wrenches. Keep the mass air sensor connector secure when the intake tube is reinstalled, because the tube routes air directly past that sensor.
What’s included
The kit includes the chrome-topped K&N high-flow air filter, the intake tube and the heat shield.









