Overview
The K&N 57-2561 is a 57 Series cold air intake kit for the 2004–2011 Ford Ranger and the 2004–2009 Mazda B4000. It replaces the factory airflow assembly with an open-housing filter and an inlet tube.
K&N estimates a 13 HP gain for this kit. The washable, reusable filter carries the Million Mile Warranty, and the design suits Ranger and B4000 owners who want an intake upgrade without a full engine rebuild.
Check the part number 57-2561 against the fitment entries below, and confirm your truck’s model year and trim before ordering.
Key features
- Estimated gain of 13 HP
- Open filter housing
- Free-flowing high density polyethylene tube
- Washable and reusable filter
- Cold air intake type with direct fit listed
- Inlet tube included
Before you install
An intake of this type changes how air reaches the engine, so the surrounding parts matter as much as the filter itself. The tube and open housing sit in the space the factory airflow assembly used, which means the mounts, hoses and wiring around that area should be checked before the kit goes on. A loose clamp or a hose rubbing against the tube can cause a vacuum leak or a noisy intake, so a short test run with the hood open is a useful habit after installation.
Filters on open-housing designs need regular attention. Washable elements are cleaned and re-oiled rather than replaced on a schedule, so have the cleaning supplies ready before the first service. Dirt that gets past a worn filter can reach the mass airflow sensor, so inspect the filter and sensor at each oil change and look for oil residue or torn filter media. Those signs point to a cleaning or replacement job.
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-2561 |
| UPC | 24844109156 |
| Series | 57 Series |
| Intake type | Cold air |
| Filter housing type | Open |
| Filter type | Oil |
| Inlet tube | Included |
| Fitment type | Direct fit |
| Estimated horsepower gain | 13 HP |
| Emissions status | 50 State Legal, CARB E.O. D-269-48 |
| Warranty | Million Mile Warranty |
| Country of manufacture | U.S.A. |
Vehicle fitment
The manufacturer list covers the 2004–2011 Ford Ranger in Edge, FX4, STX, Sport, Tremor, XL and XLT trims, and the 2004–2009 Mazda B4000 in Base, DS and SE trims.
Ford Ranger years after 2011, Mazda B4000 years after 2009 and other Mazda truck models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation usually takes 90 minutes or less. The tube and housing fit where the factory assembly sat, so confirm every clamp is tight before the engine runs.
What’s included
The kit includes the inlet tube. Check the package contents against your installation before starting the job.









