Overview
The 77-3023KP is a 77 Series high flow air intake kit for 1999–2007 Cadillac Escalade, Chevrolet Avalanche, Silverado, Suburban and Tahoe, and GMC Sierra and Yukon models. It replaces the factory airflow assembly with a mandrel bent aluminum tube and a washable, reusable oil filter. The cold air design fits the trucks and SUVs in the fit list.
K&N guarantees a horsepower increase and estimates a gain of 8 HP for this kit. The filter sits in a partial enclosure housing with an inlet tube included, and K&N backs it with the Million Mile Warranty.
Key features
- Mandrel bent aluminum tube for a free-flowing airpath
- Washable, reusable lifetime oil air filter
- Cold air intake design with partial enclosure housing
- Inlet tube included
- Estimated horsepower gain of 8 HP
- Easy to install, usually in 90 minutes or less
- Backed by the Million Mile Warranty
Older truck intake considerations
Older trucks often have aging hoses, brittle clamps and worn mounting rubber, so the intake install is a good time to inspect the surrounding parts. Replacing a cracked hose or a stretched clamp prevents air from entering the system past the filter after the swap. Check the battery and cable routing as well, since the new tube may sit in a different spot than the stock air box.
Cold-air intakes draw from an area outside the hot engine compartment, so keep the air path clear of standing water. Deep puddles and heavy rain can pull water into the filter, which can harm the engine. Mounting the filter as high as the layout allows and checking the drain points after wet weather keeps the system safer.
- Replace cracked hoses and stretched clamps
- Route the tube clear of the battery and cables
- Check the filter after driving through deep water
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 77-3023KP |
| UPC | 24844104359 |
| Series | 77 Series |
| Intake type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil, washable and reusable |
| Inlet tube | Included |
| Fitment type | Direct fit |
| Estimated horsepower gain | 8 HP |
| CARB E.O. number | D-269-37 |
| Warranty | Million Mile Warranty |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, since the 2009 and later generations of these trucks fall outside the listed years.
Not covered: model years outside these listed ranges, such as the 2009 and later generations of these trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit usually installs in 90 minutes or less. It replaces the factory filter, air box and air path rather than adding to them.
What’s included
The inlet tube is included. The kit replaces the factory filter, air box and air path.









