Overview
The K&N 57-3062 is a 57 Series performance air intake kit for 2006 Chevrolet Trailblazer and Trailblazer EXT, GMC Envoy and Envoy XL, and Isuzu Ascender models. It covers LS, LT, SLE, SLT and Base trims. It is a cold air intake with a partial enclosure housing, an inlet tube and an oil-type filter.
K&N presents this kind of intake as a complete substitute for the original airflow setup, air box included. The cold air design uses a partial enclosure filter housing and an oil-type filter.
Key features
- Cold air intake system type
- Partial enclosure filter housing
- Inlet tube included
- Oil filter type
- Direct fit design for the listed trims
Tips before fitting the kit
Before fitting, lay out the inlet tube, filter, housing and all clamps, and compare them against the parts you see on the vehicle. Make sure the tube sits clear of hot engine parts and does not rub against the hood or fan shroud. Test the fit with the hood closed before tightening everything fully.
Oiled filter upkeep is part of owning this kit. Clean and re-oil the element on a regular schedule, and wipe away extra oil before reinstalling it. Excess oil can migrate into the intake path, so a light coat is the goal.
- Compare every part against the vehicle before tightening
- Keep the tube clear of hot exhaust and engine parts
- Check hood clearance with the kit in place
- Clean and re-oil the filter on a set schedule
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | K/N57-3062 |
| Intake system type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil |
| Inlet tube | Included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2006 Chevrolet Trailblazer and Trailblazer EXT in LS and LT trims, the 2006 GMC Envoy and Envoy XL in SLE and SLT trims, and the 2006 Isuzu Ascender in Base and LS trims.
Other model years of these vehicles, and the Colorado and Canyon, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The inlet tube is included. Check the remaining kit contents against your installation before starting.









