Overview
The K&N 77-9039KP is a Performance Induction Kit for the 2016 to 2018 Toyota Tacoma in Limited, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trim. It includes an air filter, tubing and a heat shield.
The estimated gain is 18.81 HP at 5429 RPM. Double air flow is designed to add up to 15 extra horsepower, and the kit has heavy-duty construction with a positive seal and a leak-proof double roll seam.
Key features
- Double air flow design, which K&N says adds up to 15 extra horsepower
- Positive seal
- Heavy-duty construction with a leak-proof double roll seam
- Maximum filtering surface
- Built to resist filter collapse
- Designed to reduce dry starts
Intake tube and heat shield care
The heat shield on a cold air or induction setup limits radiant heat from the engine bay reaching the filter and tubing. Check that the shield stays firmly mounted after installation, because a loose shield can vibrate against hot components or rub on the tube. Look for contact marks around the tubing at each service.
Tubing joints are the other common weak point. Heavy-duty construction helps, but the seal depends on clamps being tight and the joints being clean. Recheck each connection after the first few drives, especially on a truck that sees rough trail use. Replace a cracked or softened tube rather than patching it, because a small leak can pull unfiltered air into the engine.
- Recheck clamp tightness after the first few drives
- Inspect the heat shield mounts at every oil change
- Replace cracked or softened tubing promptly
Specifications
| Brand | K&N |
|---|---|
| Part number | 77-9039KP |
| UPC | 24844363596 |
| Fitment type | Direct Fit |
| Estimated horsepower gain | 18.81 HP at 5429 RPM |
| Included | Air filter, tubing, heat shield |
| Construction | Heavy-duty, leak-proof double roll seam |
Vehicle fitment
It fits the 2016–2018 Toyota Tacoma in Limited, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trim.
Tacoma model years outside 2016 to 2018, including the 2005 to 2011 generation, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes tubing and a heat shield, so the factory tubing and shield are replaced during the swap. Confirm the full install steps for your vehicle before starting.
What’s included
The air filter, tubing and heat shield are named as included in the kit.









