Overview
The K&N Filter 57-2543 is a 57 Series performance air intake kit and its model number is 57-2543. It replaces the stock airflow assembly, meaning the filter, air box and air path, with one complete K&N system. No vehicle is named for this product, and the fitment field reads only Direct Fit.
K&N reports selling over 500,000 air intakes each year, and this 57-2543 model is built around a cold-air layout with a partial-enclosure housing and an oil-type filter. The intake tube is high density polyethylene. K&N’s estimated power increase for this model is 10 HP. The filter is washable and rated for lifetime use, which suits buyers who prefer a cleanable element to a disposable one.
Key features
- Estimated gain of 10 HP per K&N’s own figure
- High density polyethylene tube that is free-flowing
- Reusable air filter that can be washed, with a lifetime rating
- Designed to install in about 90 minutes or less
- Covered by K&N’s Million Mile Warranty
- 50 State Legal, CARB EO# D-269-26
- Manufactured in the USA
Choosing a cold air setup
A cold air intake pulls air from a cooler area of the engine bay than a stock box typically does, which can help the engine take in denser air. The benefit depends on how the tube is routed and how far the filter sits from heat sources like the exhaust manifold. Look at the route before ordering, and keep the new tube clear of hot components and moving parts.
Water is the main concern for cold air setups mounted low in the fender. Driving through deep standing water can pull moisture into the housing, so a sealed, well-positioned tube matters. Inspect the filter after heavy rain or wading, and dry it fully before it goes back on.
- Keep the inlet away from hot manifolds
- Check the tube for cracks after installation
- Inspect the filter after deep water crossings
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-2543 |
| UPC | 24844104175 |
| Product line | 57 Series performance air intake kit |
| Intake type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil |
| Inlet tube | High density polyethylene, included |
| Estimated power gain | 10 HP (K&N estimate) |
| Emissions certification | CARB EO# D-269-26, 50 State Legal |
| Filter life | Washable and reusable, lifetime |
| Warranty | Million Mile Warranty from K&N |
Vehicle fitment
Fitment is given only as Direct Fit, with no year, make, model or trim named. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
K&N puts the installation time at about 90 minutes or less. Expect to remove the factory filter, air box and air path first, since this kit takes their place. Keep the battery disconnected while you work in the engine bay.
What’s included
The inlet tube is included with the 57-2543. Verify the rest of the box contents against the installation steps when you open the package.









