Overview
The K&N 57-2591 is a 57 Series performance air intake kit for the 2015 Ford F-150. It replaces the factory airflow assembly, including the stock filter, air box and air path, with a full enclosure cold air system. It fits the XL, XLT, Lariat, King Ranch and Platinum trims.
The 57 Series is built to improve throttle response and engine sound, and the kit is designed to add horsepower. No horsepower figure is available for this part number. It suits F-150 owners who want a complete intake replacement with a washable filter and a free-flowing inlet tube.
Key features
- Full enclosure filter housing
- Cold air intake type
- Free-flowing high density polyethylene tube
- Replaces the factory filter, air box and air path
- Washable and reusable lifetime oil/dry air filter
- Rated to last up to 100,000 miles before service, depending on driving conditions
- Designed to improve throttle response and engine sound
- Covered by the K&N Million Mile Limited Warranty
Maintenance intervals
A reusable filter is cleaned and oiled rather than swapped on a fixed schedule, so a simple log helps. Record the date and mileage each time the filter is cleaned, and inspect it for tears, loose end caps and damaged gaskets. Replace the filter if the media is torn or the frame is cracked, since cleaning cannot repair damage.
A full enclosure housing protects the filter from weather, but the lid and seals still need inspection. Check the housing after washing the truck or driving through standing water, and make sure the tube has not shifted at its joints. Tighten any loose fasteners, and keep the sensor wiring away from the tube so the intake stays sealed.
- Log each cleaning date and mileage
- Inspect seals after water crossings
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-2591 |
| UPC | 24844360090 |
| Product type | Performance air intake kit, 57 Series |
| Intake type | Cold air |
| Filter housing type | Full enclosure |
| Filter type | Oil/dry, washable and reusable |
| Inlet tube | Included |
| Fitment type | Direct fit |
| Service interval | Up to 100,000 miles, depending on driving conditions |
| Warranty | K&N Million Mile Limited Warranty |
| CARB E.O. number | D-269-46 |
Vehicle fitment
Fits the 2015 Ford F-150 in King Ranch, Lariat, Platinum, XL and XLT trims. Coverage is limited to the 2015 model year.
Other F-150 model years and generations are not covered, and other Ford trucks are not covered. Confirm the truck’s year, model and trim before buying.
Installation notes
K&N gives a typical install time of 90 minutes or less. This kit is a replacement system rather than an add-on, so the stock air box and filter come out before the new tube and housing go in. Check that the full enclosure housing sits clear of nearby engine bay parts before tightening anything. Disconnect the battery before working around the intake and its sensor wiring.
What’s included
The inlet tube is included, and the washable filter is part of the kit. Tools and mounting hardware are not included.




















