Overview
The Kentrol RB4058R, titled a rear trailing arm, is a rear frame section with control arm mounts for the 2004 to 2006 Jeep Wrangler LJ. It is meant to replace the frame in the back of the vehicle.
The section uses an EZ slip design to slide onto the frame and includes the factory-needed holes and mounting locations.
Key features
- Rear frame section with control arm mounts
- EZ slip design slides onto the frame
- Includes factory-needed holes and mounting locations
- Laser cut, formed and finish welded
Rear frame and control arm mounts
Control arm mounts carry suspension loads into the frame, so the mounting points need to be straight and solid. On an older Wrangler, rust around the rear crossmember and the arm brackets is a common reason for repair, and arms can shift when a mount fails. Before fitting a new section, check the arms, bushings and the axle for wear.
Frame repair is most reliable when the surrounding metal is sound. Probe for thin spots, cracked welds and bent brackets, and fix those first. Alignment should be measured after the section is welded, since a small error at the mounts affects steering and tire wear.
- Check bushings and arm bolts for wear
- Measure mount alignment before final welding
- Inspect the axle mounting area
Specifications
| Brand | Kentrol |
|---|---|
| Part number | RB4058R |
| Position | Rear |
| Design | EZ slip |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2004 to 2006 Jeep Wrangler LJ in Unlimited and Unlimited Rubicon versions.
It does not fit other Wrangler versions or TJ and YJ models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a frame section repair. Plan the welding and any drilling with an experienced fabricator, and inspect the surrounding frame first.
What’s included
Confirm whether bolts or other hardware are needed for your installation before starting. The section is a rear frame piece with control arm mounts.













