Overview
The Kentrol RB0001L is a driver side rear shackle mount repair section for the rear of the frame on CJ models. It slides onto the frame and includes the factory-needed holes and mounting locations.
The mount is made from .125-inch cold rolled steel and ships raw and uncoated. Welding is required to install it.
Key features
- Driver side rear position
- EZ slip design slides onto the frame
- Includes factory-needed holes and mounting locations
- Made from .125-inch cold rolled steel
- Ships raw and uncoated
Welding and corrosion control
Shackle mounts take the load of the leaf spring, so a crack or rust-through at the mount can change how the rear axle sits and how the vehicle tracks. Before welding, remove rust and paint from the frame and the mount edges, and check the surrounding metal for thin spots. Welding on a frame should be done by someone experienced with frame work.
Raw steel starts to rust quickly once exposed to moisture, so coat the mount and welds promptly after installation. Shield fuel lines, brake lines and wiring near the work area, and let the welds cool before applying coating. Coating applied over damp or dirty steel will fail early.
- Grind the frame to bright metal before fitting
- Use a weld-through primer where suited
Specifications
| Brand | Kentrol |
|---|---|
| Part number | RB0001L |
| Position | Driver side rear |
| Material | .125-inch cold rolled steel |
| Finish | Raw, uncoated |
| Design | EZ slip |
| Installation | Welding required |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1976 to 1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade) and the 1976 to 1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade).
It does not fit other CJ years or Wrangler YJ and TJ models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required, so this mount suits a shop or fabricator experienced with frame work. Because it ships raw and uncoated, the steel needs protective coating after fitting, and wiring and fuel lines near the weld area should be shielded.
What’s included
Confirm whether fasteners or welding materials are needed for your installation before starting.
Not included: Welding equipment and protective coating are needed to complete the installation.











