Overview
The Kentrol Rocker Guards, part number 30414, are stainless steel formed plate guards for the 1976–1986 Jeep CJ7. Guards of this type cover the rocker panel between the wheels to help limit damage from trail debris.
The guards are 304 grade stainless steel and measure 51-1/2 inches long with a 7/64 inch thickness. The pair includes stainless hardware.
Key features
- Formed plate design
- 304 grade stainless steel
- Length of 51-1/2 inches
- Stainless hardware included
- Comes in a pair
- Fits the 1976–1986 Jeep CJ7 trims
Measuring before you cut
Long formed rocker guards are easy to misjudge when they are held against a vehicle. Before cutting or drilling, measure the rocker opening, the distance between the wheel openings and the door, and the height from the sill. Mark the mounting points with masking tape so you can check alignment from a few steps back. Stainless is harder to drill than mild steel, so use sharp bits, cutting oil and steady pressure to avoid heat discoloring the metal.
Stainless steel resists rust well, but galvanic contact with dissimilar metals can cause corrosion where the guard touches the frame. Place a rubber or plastic barrier at the contact points and use the stainless hardware with an anti-seize compound on threads. Check the guard after the first few trail runs and after each wash for loose fasteners or shifting. Keep the stainless surface clean of mud and road grit to keep its finish looking good.
Specifications
| Brand | Kentrol |
|---|---|
| Part number | 30414 |
| UPC | 812421020174 |
| Material | 304 grade stainless steel |
| Finish | Stainless steel |
| Type | Formed plate guard |
| Length | 51-1/2 inches |
| Thickness | 7/64 inch |
| Included hardware | Stainless hardware |
| Fitment type | Direct fit |
| Installation type | Cutting or drilling required |
Vehicle fitment
Listed fitment is the 1976–1986 Jeep CJ7 in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims.
The CJ5 (1959–1983) and Wrangler models are not a match for this part. Before ordering, check your vehicle’s year, model and trim against this application.
Installation notes
Mounting needs cutting or drilling. Measure the 51-1/2 inch length against your rocker area before cutting anything.
What’s included
A pair of 51-1/2 inch formed stainless guards with stainless hardware.









