Overview
The Jeep 77072426 is a set of four Hightop fender flares for the Jeep Wrangler JL four-door. It fits the 2018 Wrangler JL Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S. The flares accommodate 35-inch tires with no lift, or 37-inch tires with a two-inch lift kit, and add 2 inches of width and tire coverage.
The flares attach to the production mounting holes and need no sheet metal trimming. The set is black and paintable, and each set includes an inner fender liner. The material is durable and fade-resistant, the set is made in the USA, and it meets FCA US engineering standards.
Key features
- Covers 35-inch tires with no lift
- Covers 37-inch tires with a two-inch lift
- Mounts to production holes with no sheet metal trimming
- Comes with an inner fender liner
- Easily paintable finish with a clean character line
- Made from fade-resistant material in the USA
Clearance and flare choices
Flares cover the wheel opening so that larger tires can sit inside the body without rubbing the sheet metal. On a Wrangler they also keep mud, spray and stones from hitting the lower body as the tires throw debris at speed. Before deciding, consider the tire diameter and wheel offset you plan to run, since both change how much room the tire has at full steering lock and over bumps.
Flares are often fitted alongside a suspension lift, wider wheels or a steering stabilizer, so plan those changes together. After the first few drives, look at the inner edge of the flare and the tire sidewall for dark scuffs or fresh paint transfer. Clips and fasteners can loosen on rough trails, so check them after the first few runs and again after heavy use.
- Look for rubbing marks after a full-lock turn
- Recheck fasteners after the first few trail runs
- Touch up paint chips at the flare edges early
Specifications
| Brand | Jeep |
|---|---|
| Part number | 77072426 |
| UPC | 700008513571 |
| Position | Front and rear |
| Width and tire coverage | 2 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit to production holes |
| Finish | Black, paintable |
| Model years | 2018 Jeep Wrangler (JL), four-door |
Vehicle fitment
It fits the 2018 Jeep Wrangler (JL) Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S. The two-door JL is sold under separate part number 77072341AC.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flares mount to the production holes with no sheet metal trimming. Confirm that the tire size you run is 35 inches with no lift, or 37 inches with a two-inch lift, before ordering.
What’s included
A set of four Hightop fender flares with an inner fender liner.












