Overview
The Bushwacker Pocket Style Color Matched Fender Flare Set in graphite, part number B/W40959-84, is made for the 2017-2018 Chevrolet Silverado 1500. The set is sold as 4 flares for the front and rear, with 2 inches of width coverage.
Bushwacker says these flares are pre-finished to match the color on your truck or SUV, so there is no waiting on paint and no extra painting before installation. They are custom designed to complement oversized tires and keep the recessed stainless steel bolt look of the Pocket Style line.
Key features
- Pre-finished to match the color of the truck or SUV
- Ready to install out of the box
- Set of 4 for front and rear positions
- 2 inches of width coverage
- Recessed stainless steel bolts in the Pocket Style design
Pre-finished flare installation tips
Pre-finished flares arrive ready to mount, but the fit still determines how they look and how well they hold. Start by fitting each flare loosely and aligning its edge with the body line before tightening. An even gap along the top and sides looks clean and spreads the load across the mounting points.
Stainless hardware resists corrosion, yet it can seize if it is tightened unevenly. Work each fastener in gradual passes, moving across the set rather than finishing one corner first. Keep the flare surfaces clean during installation so grit does not scratch the pre-finished coating.
Front and rear flares see different amounts of spray and debris, so inspect all four after rough or wet drives. Look for chips along the edges where stones may have struck them, and check that the fasteners still hold the flares snug against the body.
- Fit each flare loosely before tightening
- Tighten fasteners in gradual passes
- Inspect all four flares after wet drives
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | B/W40959-84 |
| Style | Pocket Style, color matched |
| Finish | Graphite, pre-finished |
| Quantity | Sold as a set of 4 |
| Location | Front and rear |
| Width/coverage | 2 inches |
| Color attribute | Paintable |
| Fit type | Direct Fit |
Vehicle fitment
The manufacturer fitment list covers the 2017-2018 Chevrolet Silverado 1500 in Custom, High Country, LS, LT, LTZ, SSV and WT trims.
The 2019 and later Silverado 1500, the Silverado 2500 HD and 3500 HD, and the GMC Sierra are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four flares in graphite, pre-finished for front and rear positions. Count the mounting hardware in your kit before installing.









