Overview
The Jeep 77072341AC is a set of four Hightop fender flares for the 2018 to 2026 Jeep Wrangler JL two-door. It accommodates 35-inch tires with no lift, and 37-inch tires with a two-inch lift. The flares provide 2 inches of width and tire coverage.
The flares attach to the production mounting holes and need no sheet metal trimming. The set is black and paintable, with a clean character line. Each set includes an inner fender liner and is made in the USA from fade-resistant material. The flares are built to FCA US engineering standards.
Key features
- Covers 35-inch tires with no lift
- Covers 37-inch tires with a two-inch lift
- Mounts to production holes with no sheet metal trimming
- Comes with an inner fender liner
- Easily paintable finish with a clean character line
- Made from fade-resistant material in the USA
Tire size and clearance
Fender flares cover tire width at the wheel openings, so the tire size you run decides how much of the tire sits under the flare. This set accommodates 35-inch tires with no lift. Running 37-inch tires needs the two-inch lift mentioned above, so measure your tire and lift setup before ordering.
Inner fender liners help keep mud and spray out of the engine bay and protect the body panel behind the tire. Check the liner after off-road use for torn edges or loose clips, and replace it if it no longer sits flat. Repeat paint and clearance checks after any change to tires or suspension.
- Recheck tire rub after any tire or lift change
- Inspect paint on the flare edges after trail use
Specifications
| Brand | Jeep |
|---|---|
| Part number | 77072341AC |
| UPC | 700008513581 |
| Position | Front and rear |
| Width and tire coverage | 2 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit to production holes |
| Finish | Black, paintable |
| Model years | 2018 to 2026 Jeep Wrangler (JL), two-door |
Vehicle fitment
It fits 2018 to 2026 Wrangler JL two-door models. Four-door Wrangler JL models use separate part number 77072426.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flares mount to the production holes with no sheet metal trimming. Confirm that your tire size is 35 inches with no lift, or 37 inches with a two-inch lift, before ordering.
What’s included
A set of four Hightop fender flares with an inner fender liner.









