Overview
The Bushwacker 10917-07 is a pocket style fender flare set for the Jeep Wrangler TJ, with front and rear flares. It is designed to complement oversized tires and high-clearance lift kits, and it provides 4-3/4 inches of tire coverage. The product name identifies the TJ Wrangler, which places this set in the 1997 to 2006 range.
The flares install using the existing factory holes, and stainless steel hardware is included. The matte black finish is UV protected and can be painted to match or accent the body. The Dura-Flex 2000 TPO material is UV protected.
Key features
- Provides 4-3/4 inches of tire coverage
- Installs using the existing factory holes
- Stainless steel hardware included
- OEM matte black finish that can be painted
- Dura-Flex 2000 TPO, UV protected
- Front and rear flares sold as one set
Tire size and clearance
Pocket style flares tuck into the fender opening, so they cover the gap between the tire and the body without removing sheet metal. Their coverage is most useful when tire width or height goes up, because the tread can move more before it reaches the flare edge. Wider tires also need a check against the fender lip at full steering lock.
Tires and lift height work together. A taller lift changes the angle of the flares relative to the tire, and a larger tire adds rub risk at the front when the suspension compresses. Recheck clearance after changing tires, adding a lift or changing alignment, and keep the hardware snug as the new set settles.
- Check steering clearance at full lock
- Recheck after any tire size change
- Inspect hardware at each service
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10917-07 |
| UPC | 90689107138 |
| Vehicle | Jeep Wrangler TJ, 1997 to 2006 |
| Position | Front and rear |
| Sold as | Set |
| Tire coverage | 4-3/4 inches |
| Style | Pocket, with stainless steel hardware |
| Finish | OEM matte black, paintable |
| Material | Dura-Flex 2000 TPO, UV protected |
| Installation | Existing factory holes, no body-side drilling |
| Warranty | Not stated |
| Made in | USA |
Vehicle fitment
Based on the product name, this set is for the Jeep Wrangler TJ, 1997 to 2006. The JK, YJ and JL Wranglers are not covered by this name, since their fenders and mounting points are different.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flares mount in the existing factory holes, so no body-side drilling is needed. Work through each mounting step in order and check fit before tightening the hardware.
What’s included
A front and rear set of pocket style flares with stainless steel hardware.
