Overview
The JcrOffroad Steel Bumper Winch Plate (Black), part number JLHR-WP-PC, is a winch mounting plate for the stock steel bumper group on a Jeep JL Wrangler (2018-2026). It is designed to fit most standard size winches.
The plate lets you keep your stock bumper and still add a winch. It is CNC cut and formed from 3/16 inch steel with a black powder coat finish, uses bolt-on installation and includes a fairlead mounting bracket. It is designed for 2-door and 4-door Wrangler JL models.
JcrOffroad includes the winch mount, and does not include the D-ring mount or light mounts. The plate is hand built in the USA.
Key features
- Winch plate for the steel Jeep JL bumper
- Designed to fit most standard size winches
- CNC cut and formed from 3/16″ steel
- Black powder coat finish
- Bolt-on installation
- Includes fairlead mounting bracket
- Hand built in the USA
Choosing and mounting a winch
A winch plate carries the full pulling load of the winch through the bumper, so the plate and its fasteners matter as much as the winch itself. Before choosing a winch, check its mounting bolt pattern and the depth of its bottom foot against the plate. A winch that sits too far forward can interfere with the bumper’s valence or the radiator area, so measure clearance once it is mounted. Look over the stock bumper mounts for corrosion before adding load.
A fairlead and a rated synthetic or wire rope are often replaced together with a winch plate, since the rope path changes how load reaches the plate. Keep the rope clear of the bumper edges and recovery points. Avoid side pulls that twist the plate, and use a snatch block when the angle is awkward. Check the rope and fairlead after each recovery.
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | JLHR-WP-PC |
| UPC | 700008537261 |
| Product type | Steel bumper winch plate |
| Material | Steel, 3/16″ |
| Finish | Black powder coat |
| Width | Mid |
| Winch mount | Included |
| D-ring mount | Not included |
| Light mounts | Not included |
| Fairlead bracket | Included |
| Fit type | Direct fit |
Vehicle fitment
It is for the Jeep Wrangler JL (2018-2026) with the steel bumper group, in 2-door and 4-door models.
It is made for the JL with the steel bumper group. Verify the year, model and trim against your vehicle before buying.
Installation notes
A winch plate carries a lot of load, so have a helper hold it against the bumper and keep the vehicle supported while you start the fasteners.
- Torque all hardware to the specification in the included instructions.
- Look for clearance against the body, tires, exhaust and wiring before the last tightening.
- Retorque after the first drive and after your next trail run.
- Bring in a professional for any drilling, cutting or welding.
What’s included
- Steel bumper winch plate
- Fairlead mounting bracket
Not included: the winch, a D-ring mount and light mounts.














