Overview
The JcrOffroad Dagger JKRD-PC is a black powder-coated steel rear bumper for the 2007–2016 Jeep Wrangler JK, in both 2-door and 4-door (Unlimited) bodies. Its cut-away design is aimed at rear departure angle while still protecting the back of the body.
The bumper is made from 3/16 inch steel and comes with 3/4 inch thick shackle tabs and a built-in 2 inch receiver, so one piece covers recovery points and hitch duty. It suits Wrangler owners who want a rear bumper that sits tucked up and out of the way on rocky trails.
Key features
- Rear bumper made from 3/16 inch steel
- Black powder-coat finish
- Built-in 2 inch receiver hitch
- Includes 3/4 inch thick shackle tabs (D-ring mounts included)
- Direct-fit design for the Wrangler JK, 2-door and 4-door
- Cut-away design aimed at rear departure angle
- Made in the U.S.A.
Rear departure and recovery
The rear bumper is one of the parts that most affects how a Jeep handles a steep exit. A cut-away design lifts the lower edge away from the trail, which can help on drops and ledges. Pair the bumper with recovery points rated for the load, since the shackle tabs take the pull during a rescue.
Because the rear frame cross member must be cut, weigh the work before you commit. Fabrication tools, a helper and a clear plan for bracing the frame make the install easier. After installation, check the fasteners and seams after the first few trail runs, since rear bumpers see hard use on rough ground.
- Recheck bolts after the first trail runs
- Keep the rear hitch clear of mud and rock buildup
- Inspect powder coat for chips near the tabs
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | JKRD-PC |
| UPC | 700007276521 |
| Product type | Rear bumper |
| Material | 3/16 inch steel |
| Finish | Black powder coat |
| Receiver hitch | Yes, built-in 2 inch |
| Shackle tabs | 3/4 inch thick, included |
| Tire carrier | No |
| Fit type | Direct fit |
| Body styles | 2-door and 4-door |
Vehicle fitment
It is a direct fit for 2-door and 4-door 2007–2016 Jeep Wrangler JK models, across the Sport, Sahara and Rubicon lines and their special editions.
Before ordering, match your year, model and trim to the fitment.
Installation notes
This bumper requires cutting the rear frame cross member on the Jeep, so it is not a no-modification bolt-on. Plan for cutting tools or a shop that can do the work before you start.
What’s included
One Dagger rear bumper with its 3/4 inch thick shackle tabs and built-in 2 inch receiver.
Not included: A tire carrier. The bumper has no spare-tire provisions.




















