Overview
The Rampage 99606 Trailguard is a shortened, heavy-duty rear bumper for 2007–2018 Jeep Wrangler (JK) two-door and four-door models. Its shorter profile is meant to allow bigger tires and an easier approach to steep terrain.
The bumper is built from 3/16-inch cold-rolled steel and bolts to the factory mounts in the frame without drilling. It includes a 2-inch receiver tow hitch, a steel welded accessory panel for a hi-lift jack or gas can, and a modular tire carrier that can hold the tire in a standard or slanted position. Rampage backs it with a three-year limited warranty.
Key features
- Shortened design for bigger tires and approach angles
- 3/16-inch cold-rolled steel construction
- No-drill installation to factory frame mounts
- 2-inch receiver tow hitch made of 1/4-inch steel
- 3rd brake light bracket included
- Steel welded accessory panel for a hi-lift jack or gas can
- Modular tire carrier, standard or slanted position
- D-ring mounts included
Rear bumper upkeep
A rear bumper on a Wrangler takes the hits from trail obstacles and gets used for mounting extras, so it carries more load than its size suggests. Steel bumpers hold up well under that use, but thick steel is still heavy, and the added weight changes how the rear of the vehicle sits and handles. Consider that when adding a tire carrier or a hitch, since both shift weight to the rear mounts.
Inspect the welds, the receiver and the mounting points after rough trips. Chipped powder coat should be touched up before rust starts, and bolts used to attach accessories can loosen from vibration. Keep the tire carrier’s hinge and locking parts clean and lubricated so they operate smoothly, and check the carrier’s bolts after the first drives.
- Check welds and receiver mounts after rough trips
- Touch up chips in the powder coat early
- Re-check tire carrier bolts after the first drives
Specifications
| Brand | Rampage |
|---|---|
| Part number | 99606 |
| UPC | 873563010423 |
| Product line | Trailguard |
| Position | Rear |
| Fitment type | Direct fit |
| Material | 3/16-inch cold-rolled steel |
| Finish | Textured black powder coat |
| Receiver hitch | 2-inch, 1/4-inch steel, reinforced with 7/16-inch ring |
| Brake light | 3rd brake light bracket included |
| Tire carrier | Modular, standard or slanted position |
| Warranty | Three-year limited |
| D-ring mount | Included |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), in two-door and four-door models.
Wrangler JL models from 2018 on and Wrangler TJ models are not covered. Check your year, model and trim against this before ordering.
Installation notes
The bumper is a no-drill installation that attaches to the factory mounts in the frame.
What’s included
The bumper with its 2-inch receiver, 3rd brake light bracket, D-ring mounts and modular tire carrier.


















