Overview
The Dana Spicer 706411X is an inner wheel bearing set for the Dana 60 front axle on 1978 to 1998 Ford F-250 and F-350 trucks.
Each set holds one cone and one cup, the matched pair that forms an inner wheel bearing. Dana Spicer says parts backed by Dana are engineered to the standards it delivers to OE manufacturers around the world.
The set fits the Dana 60 front axle. It fits the 1978–1998 Ford F-250 and the 1978–1997 Ford F-350.
The Dana 60 front axle under these Ford trucks uses a tapered roller bearing at each wheel end, with an inner and outer bearing on the spindle. This set is the inner one and consists of a cone and cup rather than a complete hub assembly. Confirm the number 706411X against the bearing you remove, and check your truck’s year, because the F-250 range runs one year longer than the F-350.
Key features
- Inner wheel bearing set
- One cone and one cup included
- For the Dana 60 front axle
- Fits 1978 to 1998 Ford F-250 and F-350
- Direct fit
Bearing replacement tips
Cone and cup bearings work as a matched pair, so the cone should stay with its own cup and new races should be installed as a set. Pack the bearings with fresh wheel bearing grease before seating them, and wipe the spindle clean first. A worn race or pitted cone should be replaced rather than reused, because uneven contact can overheat the hub.
Set the bearing preload after the hub is reassembled and check for smooth rotation without play. Since the outer bearing, seal and hardware are separate, plan to buy those with this set. Inspect the spindle and grease seal for wear at the same time, and re-check preload after the first few drives.
- Replace the seal whenever the hub is opened
- Use wheel bearing grease, not general grease
- Check the spindle for scoring
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 706411X |
| Part type | Inner wheel bearing set |
| Axle | Dana 60 front |
| Contents | 1 cone and 1 cup |
Vehicle fitment
The set fits these Ford trucks:
- 1978–1998 Ford F-250 (Base, Custom, Eddie Bauer, Lariat, Northland, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat)
- 1978–1997 Ford F-350 (Base, Custom, Eddie Bauer, Northland, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat)
Only the F-250 and F-350 are listed, and the F-350 entry ends in 1997. The F-150 and later Super Duty trucks are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A cone and cup make one inner bearing. A front wheel end also needs an outer bearing, a grease seal and fresh grease, none of which are in this set.
What’s included
One bearing cone and one bearing cup.
Not included: the outer bearing, grease seal and hub hardware.









