Overview
The ICON Vehicle Dynamics 61720C is a front bolt-in coilover conversion with a CDC valve for the 2005–2022 Ford F-250 Super Duty and F-350 Super Duty. It uses 2.5-inch remote reservoir coilovers from ICON’s 2.5 VS Series, with Eibach coil springs, FK Rod End bearings and vehicle-specific valving.
The CDC valve lets the driver adjust ride characteristics with the turn of a knob, which suits trucks that carry different loads or are driven on different terrain. The coilovers can be rebuilt or revalved when needed. The kit fits the factory wheels and tires, and recommended aftermarket wheel sizes are given.
Key features
- Compression damping control valve, adjustable by knob
- Front 2.5-inch remote reservoir coilovers
- Bolt-in conversion
- Eibach coil springs and FK Rod End bearings
- Fits factory wheels and tires
Setting the damping
A compression damping control valve is useful when the truck’s load or terrain changes often. A firmer setting helps control a heavy front end or a rough, fast trail, while a softer setting can improve comfort on pavement. Pick a setting for the way the truck is used most, and adjust it when the use changes.
The valve is part of a coilover that should be inspected regularly. Check the knob’s action, the coilover seals and the reservoir for leaks during routine service. A valve that feels stuck or does not change the ride may need a service, which is typically handled through a rebuild.
- Choose a setting for the most common use
- Check the knob’s action during routine service
- Inspect seals and reservoirs for leaks
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO61720C |
| Suspension type | Front coilover conversion with CDC valve |
| Position | Front |
| Shocks | 2.5 VS Series remote reservoir coilovers with CDC valve |
| Recommended wheels | 17×8.5-inch, 5.00-inch backspacing, 6mm offset; 18×9-inch and 20×9-inch, 5.25-inch backspacing, 6mm offset |
| Recommended tire | 35 x 12.50 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2022 Ford F-250 Super Duty and F-350 Super Duty, including Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
The list does not cover the 2004 and earlier Super Duty trucks or the 2023 and later models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
On 2005–2016 F-250 trucks, ICON says 4-inch rear blocks with a U-bolt kit are needed to sit level with the 2.5-inch front lift. It recommends block part 194275 and U-bolt kit 37003 for 2005–2010 trucks, or U-bolt kit 67003 for 2011–2016 trucks. On 2020 and later trucks, the lift is a little higher than advertised.
What’s included
The front 2.5 VS Series coilover conversion with the CDC valve, coil springs and shock hardware.
Not included: The rear blocks and U-bolt kit that ICON recommends for 2005–2016 F-250 trucks.






