Overview
The Pro Comp Poly-Vinyl Shock Boot in Royal Blue (part number 12100) covers the chrome-hardened piston rod of a shock absorber. The boot keeps dirt, dust, mud and other contaminants off the rod, which extends the life of the shock.
The boots are sold as a pair and are a universal fit, so the shock they go on determines whether they are the right size.
Key features
- Protects the chrome-hardened piston rod
- Keeps out dirt, dust, mud and other contaminants
- Poly-vinyl construction
- Royal Blue color
Before you buy
Shock boots are a low-cost way to guard an exposed piston rod, but they only work when they seat properly over the rod and shock body. Before buying, measure the rod diameter and the length of the shock you plan to cover, then compare those numbers with the boot. A boot that is too tight can pull on the seal, while a loose one lets grit slide in past the edge.
Boots wear over time. Look for splits, cracks at the seams, or a stiff, brittle feel after months in the sun or cold. Replace them once they stop fitting snugly, because a damaged boot does little to keep mud off the rod. Wash off caked mud after trail runs so grit does not work under the lip.
Shock boots are often replaced along with the shock itself, since a worn seal or pitted rod can cause the same leaks regardless of how well the boot fits. If you are upgrading shocks, check the new rod size before reusing the old boots.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 12100 |
| UPC | 41490102061 |
| Color | Royal Blue |
| Material | Poly-vinyl |
| Quantity | Pair |
Vehicle fitment
It is a universal fit, so confirm fit for your vehicle’s year, model and trim and check the boot against your shock’s piston rod before ordering.
Confirm your vehicle’s year, model and trim before ordering.


















