Overview
The Pro Comp 11127 is a black rubber shock boot that covers the piston rod of a shock absorber. It keeps dirt, dust, mud and other contaminants off the chrome-hardened rod, which Pro Comp says extends the life of the shock.
Key features
- Black rubber boot
- Protects the chrome-hardened piston rod
- Guards against dirt, dust, mud and other contaminants
- Sold as each
Choosing a shock boot
A shock boot is a flexible cover that sits over the exposed piston rod, the chrome shaft that slides in and out of the shock body as the suspension moves. Because the rod picks up grit on every compression and rebound, a boot is a simple way to keep that surface cleaner between service intervals. Boots work best on shocks that run in mud, sand or gravel, where the rod would otherwise collect abrasive debris.
Before you buy, measure the diameter of the rod and the length of travel your shock uses, and make sure the boot is designed to cover that rod and stroke. A boot that is too tight can bind at full extension, and one that is too loose will not seal well. Look at how the boot attaches at the shock body and at the rod end, since a secure fit keeps it in place on rough trails.
Inspect boots regularly. Look for cracks, tears, flattening or a boot that has pulled away from its mounting point. Wipe the rod clean before the boot goes on, and check that the rod is free of pitting, because a damaged rod will wear a seal faster than a boot can prevent.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 11127 |
| UPC | 614901020496 |
| Color | Black |
| Material | Rubber |
| Sold as | Each |
Vehicle fitment
Confirm the boot fits your shock’s piston rod before ordering.
What’s included
One shock boot, sold as each.












