Overview
The ICON Vehicle Dynamics 56104 is a rear hydraulic bump stop system for the Toyota 4Runner and FJ Cruiser and the Lexus GX460 and GX470. ICON offers it as a bolt-in replacement for the factory rubber bump stops, and it is designed to reduce the rear end kick that factory rubber stops can cause on rough terrain.
Factory rubber stops absorb limited energy and release it uncontrollably on rebound, which can make the ride harsh and the vehicle hard to handle off road. The hydraulic stops are velocity sensitive, so the energy absorbed increases the faster they are engaged. The design is intended to offer more bottom-out resistance than stock. It installs at the rear only, so the front suspension keeps its factory bump stops.
Key features
- Hydraulic bump stop that is velocity sensitive
- Designed to reduce rear end kick on rough terrain
- Bolt-in installation that fits inside the coil spring
- Fully rebuildable bump stops
- Increased bottom-out resistance compared with stock
Rear Hydraulic Service
Hydraulic bump stops are sealed units, so their performance depends on the seals and the fluid inside. Over time the seals can wear and the damping can change, which shows up as a softer or less controlled stop at the end of travel. Rebuilding the stop restores the original response and is often more practical than replacing the whole system.
When a rear hydraulic stop is removed, inspect the rod for scoring and the body for leaks or dents. Check the mounting bracket and the bolts that hold the system, and tighten them to the required values. A stop that sits off center wears unevenly, so confirm alignment before the truck returns to service.
- Look for leaks around the body and seals
- Inspect the rod for scoring
- Confirm the stop is centered before returning to service
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO56104 |
| Position | Rear |
| Type | Hydraulic bump stop system |
| Response | Velocity sensitive |
| Serviceability | Fully rebuildable |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2010–2023 Lexus GX460 in Base, Luxury and Premium trims, the 2003–2009 Lexus GX470 Base, the 2003–2023 Toyota 4Runner across its listed trims, and the 2007–2014 Toyota FJ Cruiser in Base, TRD Special Edition and Trail Teams Special Edition trims.
Other Lexus and Toyota models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit installs inside the coil spring, and the bump stops can be rebuilt and tuned. Because it is a rear position system, check the rear suspension for clearance and travel after installation. Worn units can be rebuilt rather than replaced.





