Overview
The Gorilla Automotive 66-5710 is a hub centric ring measuring 66mm outside diameter and 57.10mm inside diameter. Hub centric rings sit between the wheel and the hub so the wheel is centered on the hub’s pilot. Its vehicle fit depends on your hub, so measure it before use.
Hub-centric fit basics
A hub centric ring fills the gap between a wheel’s center bore and the hub’s pilot, so the load is carried by the hub rather than the lug studs. This helps reduce vibration that can come from a wheel that is off-center. Choose the ring size by matching the hub’s pilot diameter and the wheel’s bore, not by the lug pattern alone.
A ring should fit snugly without forcing. Clean the hub face and ring before fitting, and check for burrs or deformation that would stop the wheel seating flat against the hub. A ring that is too loose or too tight should not be used.
Re-check lug nut torque after the first drives, since a wheel that has just been fitted can settle. Look at the ring periodically for cracks, wear, or corrosion, and replace it if any appear.
Specifications
| Brand | Gorilla Automotive |
|---|---|
| Part number | 66-5710 |
| UPC | 12619700585 |
| Outside diameter | 66mm |
| Inside diameter | 57.10mm |
Vehicle fitment
Measure your hub and wheel bore to confirm the 57.10mm inside diameter suits your hub. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The ring is sold as one hub centric ring. Check the package contents against your installation before starting.






