Select your vehicle

Hellwig Adjustable End Links – 7973

Hellwig

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Hellwig part 7973 adjustable end links
  • Fits 1999 to 2005 Ford Excursion, F-250 and F-350 Super Duty trucks
  • Most units adjust in 3-inch increments
  • Powder coated components and zinc plated hardware

Description

Overview

The Hellwig 7973 is a pair of adjustable front sway bar end links for Ford Excursion, F-250 and F-350 Super Duty trucks from 1999 to 2005. Sway bar end links connect the stabilizer bar to the suspension, and these adjustable units keep the sway bar in the correct position when ride height has been changed.

It is designed for vehicles that have been lifted or lowered. Raising a truck 4 inches means the end link overall length must also increase by 4 inches, so the adjustment is the key feature. The links use heavy duty components and a polyurethane bushing built for high articulation.

Key features

  • Adjustable overall length to match altered suspension heights
  • Polyurethane bushing designed for high articulation
  • High tensile strength threaded studs and heavy thread cores
  • Most units adjust in 3-inch increments
  • Powder coated components and zinc plated hardware
  • Installable with common hand tools

Adjusting end links for lift height

Adjustable end links let the sway bar stay in its intended position after the suspension height changes. Length should be set with the truck at its final ride height, because a link set at the wrong length can pre-load the bar or limit how far the suspension can travel. Heavy trucks put strain on the stud threads and bushings, so the adjusted length should be locked down firmly once it is set.

Articulation matters on trucks that see hard use. Polyurethane bushings resist wear better than rubber in many setups, but they can squeak if they run dry, so a light lubricant is often recommended during service. Re-check nut torque after the first few drives, since settling can change the feel of the suspension.

  • Set length at final ride height
  • Re-check fasteners after the first drives
  • Inspect bushings for cracks or stiffness

Specifications

Brand Hellwig
Part number 7973
UPC 745662079734
Position Front
Fitment type Direct fit
Type Adjustable end link (Hellwig’s spec line reads non-adjustable; confirm with Hellwig)
Adjustment Most units in 3-inch increments
Finish Powder coated components, zinc plated hardware

Vehicle fitment

It fits the following vehicles:

  • 2000–2005 Ford Excursion (Eddie Bauer, Limited, XLS, XLT)
  • 1999 Ford F-250 (Base, Lariat, XL, XLT)
  • 1999–2004 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
  • 1999–2004 Ford F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)

Confirm fit for your vehicle’s year, model and trim before ordering, especially for F-250 or F-350 Super Duty trucks from 2005 onward, F-150 trucks or other Excursion generations.

Installation notes

The links install with common hand tools, whether by a do-it-yourself owner or a professional. Set the length to match your lift height before final tightening, then check sway bar position.

What’s included

The kit has powder coated components and zinc plated hardware. Check the package contents against your installation before starting.

SKU: HEL7973 Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 16.00 × 5.00 × 2.00 in
brands

Fitment

VehicleYearsTrims
Ford Excursion2000–2005Eddie Bauer, Limited, XLS, XLT
Ford F-2501999Base, Lariat, XL, XLT
Ford F-250 Super Duty1999–2004Harley-Davidson Edition, King Ranch, Lariat, XL, XLT
Ford F-350 Super Duty1999–2004Harley-Davidson Edition, King Ranch, Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Hellwig 7973 fit a 2005 Ford Excursion?

Yes. The manufacturer fitment list includes the 2000 to 2005 Ford Excursion in Eddie Bauer, Limited, XLS and XLT trims. Confirm your vehicle's year and trim before installing.

Are these Hellwig end links adjustable?

Yes. Most units adjust in 3-inch increments, so the overall length can be set for a vehicle whose height has been altered. The links keep the sway bar in the correct position when ride height changes.

What is Hellwig part number 7973?

It is an adjustable end link set with UPC 745662079734. It fits Ford Excursion and F-250 and F-350 Super Duty trucks from 1999 to 2005.

Does the kit include hardware?

The end links use powder coated components and zinc plated hardware. Check the package contents against your installation before starting.

Do adjustable end links need to be re-checked after a lift?

Yes. Re-check the length and fastener tightness after the first few drives, since the suspension settles. Also confirm the sway bar sits where it should at final ride height.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon