Overview
The Rubicon Express heavy-duty tie rod bar fits the 2007 to 2017 Jeep Wrangler JK, including the Rubicon and Unlimited models in two-door and four-door form. It uses 1-ton replaceable and greaseable tie rod ends on induction hardened alloy steel ball studs measuring 1.250 inches in diameter.
The tie rod bar has a heat treated 1045 housing and a heat treated chromoly adjustment sleeve. The sleeve sets the tow angle without removing the bar from the vehicle. The offset design gives clearance for larger axle housings and covers, and it can be used with OE wheels and backspacing.
Key features
- 1-ton greaseable and replaceable tie rod ends
- Induction hardened alloy steel ball studs, 1.250-inch diameter
- Heat treated 1045 housing
- Chromoly adjustment sleeve for tow angle
- Offset design for larger axle housings
- Machined billet aluminum steering stabilizer mount included
Steering geometry and tie rod care
A tie rod bar links the steering to the wheels, so it carries steering loads on every turn and absorbs impacts from the trail. Heavier tires, larger axle housings and off-road use all put more stress on the ends and the ball studs. Keeping the bar in good condition helps the steering stay predictable and reduces uneven tire wear.
Greasable tie rod ends should be serviced at regular intervals. Check the ends for play by hand, inspect the boots for tears, and look for bent or stressed metal near the housing. Adjustments to tow angle change toe, so an alignment check is needed after any change.
- Grease the ends at each service interval
- Check the boots for tears and grit
- Re-check toe after adjusting tow angle
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 614901226287 |
| Tie rod ends | 1-ton, greaseable and replaceable |
| Ball studs | 1.250-inch induction hardened alloy steel (5140) |
| Housing | Heat treated 1045 |
| Adjustment sleeve | Heat treated chromoly |
| Stabilizer mount | Machined billet aluminum, included |
Vehicle fitment
It fits the 2007 to 2017 Jeep Wrangler JK, including the Rubicon and Unlimited models in two-door and four-door form.
Other Wrangler generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The adjustment sleeve sets the tow angle with the bar still on the vehicle. Check the toe and steering alignment after the bar is installed and set.
What’s included
The heavy-duty tie rod bar with its tie rod ends and the machined billet aluminum steering stabilizer mount.






















