Overview
The Rubicon Express RM13215 is a front right outer tie rod end for the 2007 to 2018 Jeep Wrangler JK, including the Rubicon, Sahara, Sport and Unlimited trims. It has a right hand thread and is used with Rubicon Express part R/E2610.
This trail ready tie rod end replaces the factory tie rod end at the front right outer position. It is a direct fit.
Key features
- Front right outer position
- Right hand thread
- Trail ready replacement for factory tie rod ends
- For use with R/E2610
- Direct fit
Steering geometry after replacement
A tie rod end connects the steering linkage to the knuckle, and it moves through every turn and bump. When one wears, the front wheel can feel loose, wander on the highway, or wear the inner edge of the tire unevenly. Replacing a worn end restores control in those spots.
After replacing a tie rod end, toe is the setting to recheck. Changing the length of a tie rod alters toe, so an alignment is needed. The drag link and steering stabilizer may be worn too, so inspect them at the same time.
Look for torn boots, loose ball joints and play when you rock the front wheel side to side. Grease the new end if it has a grease fitting, and keep the boot intact to limit dirt. Keep spare cotter pins or lock nuts on hand for installation.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RM13215 |
| UPC | 614901445572 |
| Position | Front right outer |
| Thread | Right hand |
| Used with | R/E2610 |
| Body style | 2-door and 4-door |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler JK, including the Rubicon, Sahara, Sport and Unlimited trims.
The list covers only the JK, so other Wrangler generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The part is for the right side and uses a right hand thread. After installation, check the toe setting and the steering alignment.
What’s included
One front right outer tie rod end.







