Overview
The G2 Axle and Gear 85-2018M is a mini spool for GM 12 bolt truck rear axles in the 8.875 inch size, with 30 splines. A spool locks both axle shafts so the wheels turn together, and the brand presents the mini format as an economical option.
Machined from 4130 billet steel, the unit suits the 12 bolt housing type named by the maker. Confirm the 30 spline count and the 8.875 inch housing before fitting, because the spool must match both.
Key features
- Mini spool for GM 12 bolt 8.875 inch truck rear axles
- 30 spline fitting
- 4130 billet steel construction per the maker
- Economical traction option compared with other devices
Preparing a 12 bolt spool
A mini spool suits 12 bolt truck rear axles that need a locking action without the cost of a full carrier change. It ties the two shafts together so both wheels turn at one speed. Expect the same tradeoff as other spools: tight turns on dry pavement become harder, so it suits trail or off-road use best. Keep the truck stable on stands throughout the work.
Before buying, confirm the axle shafts and housing are the 12 bolt type. Ring gear, pinion and bearing parts are often replaced during a spool install, since the carrier is already open. Look for chipped teeth or rough bearings on the old parts and replace them while the carrier is apart.
- Housing size and axle type
- Axle shaft spline count
- Ring gear and pinion condition
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 85-2018M |
| UPC | 631410103533 |
| Axle type | GM 12 Bolt 8.875 inches |
| Popular axle manufacturer | GM |
| Axle location | Rear |
| Axle spline | 30 splines |
| Differential type | Spool |
| Material | 4130 billet steel |
Vehicle fitment
This spool is universal fit for GM 12 Bolt 8.875 inch axles. No model years or chassis codes come with it, so housing size and spline count are the deciding checks.
A mini spool and a full spool are separate parts, so check the item name before choosing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installing a mini spool requires removing the carrier, then setting ring gear backlash and bearing preload. Choose a shop with carrier setup experience, and keep the vehicle stable on stands during the work.
What’s included
The mini spool only.
Not included: you will need a ring gear, pinion, bearings and carrier body from elsewhere.







