Overview
The FUEL Off-Road Avenger D606 is a 20×9 inch aluminum wheel with a gloss black milled finish, part number MHTD60620909850. It is listed with a 6 on 135 / 6 on 139.7 bolt pattern for trucks and SUVs, so the bolt pattern is the first figure to match against your hub.
FUEL Off-Road describes its wheels as available in many bolt pattern and offset combinations, with a design meant to suit both on-road and off-road driving. The Avenger D606 uses a 1 offset and a 5.04 backspacing. Offset is the distance from the mounting face to the wheel centerline, and backspacing is the distance from the mounting face to the inner lip, so both figures decide how the wheel sits in the fender and clears the brake parts.
Key features
- Gloss black milled finish on a 20-inch diameter wheel
- 9-inch wheel width
- Dual bolt pattern listing: 6 on 135 and 6 on 139.7
- Offset of 1 and backspacing of 5.04
- Aluminum construction
- Manufacturer label of Universal Fit
Matching two bolt patterns
The 6 on 135 and 6 on 139.7 patterns are close in size but not interchangeable. A hub that fits one will not accept the other, and forcing a wheel onto the wrong pattern can damage studs and the wheel itself. Measure the bolt circle precisely, using the distance across the lugs, before deciding which pattern your vehicle needs.
A 1 offset with 5.04 backspacing places the wheel close to the centerline, which affects how the tire sits in the fender and near the brake parts. Recheck clearance after any change in tire width or suspension height. Keep the gloss black milled finish clean with mild soap, and avoid abrasive pads that can scratch the milled edges.
- Measure the bolt circle precisely
- Confirm the pattern before ordering
- Check brake clearance after any suspension change
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD60620909850 |
| Model | Avenger D606 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 135 / 6 on 139.7 |
| Offset | 1 |
| Backspacing | 5.04 |
| Finish | Gloss Black Milled |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
No vehicle is named for the Avenger D606, and no year, model or trim is listed. The manufacturer marks the wheel Universal Fit, so fitment has to be checked by measurement: bolt pattern, offset and backspacing against your vehicle’s hub and clearance specifications.
Universal Fit does not confirm clearance for brakes, suspension or tire size. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 6 on 135 and 6 on 139.7 bolt patterns with your hub before mounting, since they differ and a mismatched pattern cannot be mounted safely. Check fender and brake caliper clearance with the 1 offset and 5.04 backspacing. Use lug hardware suited to the wheel and tighten it to your vehicle’s torque requirement.
What’s included
This is a single gloss black milled wheel.
Not included: Tires, lug nuts and center caps need to be sourced separately.









