Overview
The FUEL Off-Road D525 Revolver is a 15×10 inch aluminum wheel with part number MHTD52515000437. It has two bolt patterns, 5 on 4.5 and 5 on 4.75, and is sold as universal fit rather than for a named vehicle.
The Revolver style is black with machining and carries a -43 offset and 3.81 backspacing. Confirm the centering fit with your hub before mounting.
Key features
- 15-inch diameter and 10-inch width.
- Aluminum construction.
- Black finish with machining on the Revolver style.
- Two bolt patterns: 5 on 4.5 and 5 on 4.75.
- Offset of -43 and backspacing of 3.81.
- Universal fit wheel with no particular vehicle applied.
Negative offset and clearance
A negative offset moves the mounting face outward, so the wheel sits farther out under the fender than a standard fitment. That position can increase load on wheel bearings and steering parts and can narrow the gap between the tire and the inner fender liner. Check how the wheel sits before mounting, including any tire width change that would push the tread further outward.
Brake caliper clearance deserves a close look too, since the inner side of a wheel with deep backspacing needs room behind the spokes. Spacers and wider tires change both clearance and steering feel, so treat them as one combined change rather than separate ones. Inspect the lug seats and wheel face after the first few drives, and check for rub marks on the fender edge.
- Test full steering lock with the tire mounted
- Check the inner lip against caliper and hardware
- Recheck lug torque after early drives
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD52515000437 |
| Style | Revolver |
| Diameter | 15 inches |
| Width | 10 inches |
| Bolt pattern | 5 on 4.5/5 on 4.75 |
| Offset | -43 |
| Backspacing | 3.81 |
| Construction | Aluminum |
| Finish | Black with machining |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named for this wheel, and it is universal fit. Match the 5 on 4.5 and 5 on 4.75 patterns and the -43 offset to your hub before choosing it.
A -43 offset places the face well outboard and the 3.81 backspacing sets the room behind it, so measure clearance before choosing a tire. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the wheel with its tire at full steering lock to check the inner lip against brake caliper and hardware. Because the offset is -43, confirm the outer face clears the fender edge as well.
What’s included
Only the wheel is included. Confirm the hub bore and fit before mounting.
Not included: Tires, lug nuts and caps must be bought separately.









