Overview
The Omix-Ada OAI18272.20 is a replacement front sway bar bushing bracket for Jeep Wrangler JK and JKU models. It is for 2007 through 2017 models without the Rubicon package and replaces OE part number 52110141AB.
Omix-Ada says its replacement parts meet or exceed OE standards. Each bracket is sold individually, and two are required per vehicle. Omix-Ada gives part number 18283.14 for the sway bar bushing that goes with this bracket.
Key features
- Replacement front bracket for the sway bar bushing
- Replaces OE part number 52110141AB
- Sold individually, 2 required
- Paired with sway bar bushing 18283.14
- Designed for models without the Rubicon package.
Sway bar bushings and brackets
The front sway bar bushing bracket holds the sway bar to the frame and lets the bar twist as the axle moves. When the bracket cracks or the bushing wears, the bar can shift and make a clunk over uneven ground. A worn bracket can also let the bushing spin, which speeds up wear on the bar.
Inspect the brackets whenever the bar is out for service. Look for cracks around the welds, bent tabs and rust at the mounting surface. Bushings and brackets are usually replaced as a set so the bar sits square and the new parts wear evenly.
- Look for cracks around bracket welds
- Check bushings for flattening or splits
- Clean and inspect the frame mounting surface
- Replace bushings and brackets as a pair
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | OAI18272.20 |
| Position | Front |
| Replaces OE part | 52110141AB |
| Quantity per vehicle | 2, sold individually |
| Matching sway bar bushing | 18283.14 |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), in two-door and Unlimited four-door body styles. The bracket is for 2007 through 2017 models without the Rubicon package, so confirm your package before ordering.
The list does not include the Wrangler JL or the Gladiator JT. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two brackets are required, so order a pair for each vehicle. If the sway bar bushings are worn, Omix-Ada’s note points to part number 18283.14 as the matching bushing.
What’s included
The bracket is sold individually, and two are required. The sway bar bushing is a separate part.










