Overview
The Artec Industries JK2107 is a pair of bare aluminum front inner fenders for the 2007-2017 Jeep Wrangler JK, covering Rubicon and Unlimited models in 2-door and 4-door bodies. Front inner fenders, also called inner fender liners, sit inside the wheel well behind the tire and help keep dirt and debris out of the engine compartment. Artec makes these panels from 1/16-inch aluminum to keep them lightweight.
The fenders are cut with CNC laser equipment and bent with CNC equipment for a precise fit. They can be trimmed for coilovers or bumpstops, allow the use of larger tires, and work with Artec Nighthawk fenders as well as most other aftermarket fenders. They are manufactured in-house in the USA.
Key features
- Bare 1/16-inch aluminum construction for a lightweight front inner fender
- CNC laser cut and CNC bent for a precise fit
- Can be trimmed for use with coilovers or bumpstops
- Works with Artec Nighthawk fenders and most other aftermarket fenders
- Allows use of larger tires
- Stamped with the Artec logo, which Artec says adds rigidity to the inner fender
- Sold as a pair
Clearance and tire size
Inner fenders work as a barrier between the wheel well and the engine bay, so their position controls how much room the tire and suspension have. When tire size or lift height changes, the inner fender is one of the first places to check for rubbing. Turn the wheel fully in both directions with the vehicle on the ground, then again after any suspension change, and look for scrape marks on the panel edges.
Metal that is trimmed for coilovers or bumpstops should be deburred and cleaned before paint or sealer is applied. Fresh aluminum edges can cut skin, and filings can stay in the wheel well. Inspect the panel after the first off-road trips, since flex and mud can shift the mounting points over time.
- Check clearance with the suspension loaded
- Deburr trimmed edges before reinstalling
- Re-check tire rub after any suspension change
- Clean mud from the panel regularly
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | JK2107 |
| UPC | 816791026804 |
| Material | 1/16-inch aluminum |
| Finish | Bare |
| Construction | CNC laser cut and CNC bent |
| Quantity | Pair |
| Vehicle | 2007-2017 Jeep Wrangler JK, 2-door and 4-door |
Vehicle fitment
It fits the 2007-2017 Jeep Wrangler (JK), including the 70th Anniversary, 75th Anniversary, Sport, Sport S, Sahara, X, Rubicon and Unlimited trims.
The list does not cover the Wrangler TJ, the Wrangler LJ or the 2018-and-newer JL generation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Trimming for coilovers or bumpstops removes metal permanently, so test-fit the panel and mark the cut line before cutting. Wear gloves when handling freshly trimmed aluminum edges.
What’s included
One pair of front inner fenders. Check the package contents against your installation before starting.












