Overview
The Artec Industries Freedom Edition Front Inner Fenders, part number JL5110, are lightweight aluminum inner fenders for the 18-current Jeep Wrangler JL, two and four door. They protect the engine compartment from dirt and debris and have a stamped design that adds style and rigidity.
The fenders are made from 1/16 in aluminum using CNC laser cutting and CNC bending for a precise fit. A proprietary stamping process adds the logo as a styling element and increases the rigidity of the inner fender. Laser-cut vents help the engine compartment stay cool without an extra piece of mesh.
The fenders allow larger tires and have been tested with no lift and 37 in tires. They can be trimmed for use with a coilover setup and are compatible with trimmed OEM fenders. They are manufactured in-house in the USA.
Key features
- 1/16 in lightweight aluminum construction
- Proprietary A-blade stamping process that also adds rigidity
- CNC laser cut and CNC bent for a precise fit
- Laser-cut vents to help keep the engine compartment cool
- Can be trimmed for coilover use
- Compatible with trimmed OEM fenders
- Allows the use of larger tires
- Manufactured in-house in the USA.
Trimming and clearance for larger tires
Inner fenders cover the wheel well behind the tire, so their shape decides how much room is left for a larger tire and suspension travel. Before trimming or mounting, measure the clearance at full steering lock and at full suspension compression. The fender edge is often the first point of contact, so test that spot first.
Aluminum inner fenders are light, but they can bend if pushed or dented during rough trail use. Check the edges and mounting points after each hard run, and look for cracks around vents and trimmed areas. Trimmed edges can be cleaned up with a file to remove sharp burrs before reinstalling.
- Measure clearance at full steer and full compression
- Check vent edges for cracks after trail use
- Deburr trimmed edges before reinstalling
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | JL5110 |
| UPC | 816791028693 |
| Position | Front inner fenders |
| Material | Lightweight 1/16 in aluminum |
| Application | 18-current Wrangler JL, two and four door |
| Tire testing | Tested with no lift and 37 in tires |
| Trimming | Can be trimmed for coilover use |
Vehicle fitment
These fenders are for the 18-current Jeep Wrangler JL, two and four door models.
Earlier Wrangler JK models are not covered by this JL design. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The fenders can be trimmed for coilover setups and are compatible with trimmed OEM fenders. Trimming is permanent, so plan the cuts carefully before making them. The laser-cut vents mean no extra mesh needs to be bolted on.
What’s included
Front inner fenders only. Check the package contents against your installation before starting, including any mounting parts you need.


















