Overview
The Artec Industries JL5107 is a solid front inner fender for 2-door and 4-door 2018-2026 Jeep Wrangler JL models. Solid means the panel has no vent openings, unlike the vented JL5106. It is made from 1/16-inch aluminum with CNC laser cut and CNC bent construction for a precise fit.
It allows the use of larger tires and was tested with no lift and 37-inch tires. It can be trimmed for coilover use and is compatible with trimmed OEM fenders, which helps if the stock fender has already been modified.
Key features
- Solid panel with no vent openings
- Lightweight 1/16-inch aluminum construction
- CNC laser cut and CNC bent for a precise fit
- Proprietary A-blade stamping process
- Can be trimmed for use with coilovers
- Compatible with trimmed OEM fenders
- Allows use of larger tires
Clearance and tire changes
A front inner fender sits behind the front tire and around the shock and steering components. Its job is to keep mud, rocks and spray out of the engine bay and to give the wheel well a finished look. When tire size goes up, the panel edge and the wheel opening become the main clearance points. Check the gap at full steering lock and at full suspension compression before deciding whether the stock liner needs trimming.
Solid liners suit builders who want fewer openings in the front of the engine bay, while vented designs allow more airflow. Aluminum can dent when rocks strike it, so inspect the edges after each off-road trip. Look for cracks at the bend lines, loose fasteners and rub marks on the tire. Recheck clearance after any change in wheel offset or tire width, because small shifts can bring the tire into contact with the panel.
- Recheck clearance after changing wheel offset
- Inspect edges for dents and cracks after trail use
- Keep fasteners snug and replace any that strip
- Look for rub marks where the tire meets the panel
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | JL5107 |
| UPC | 816791028662 |
| Material | 1/16-inch aluminum |
| Design | Solid, no vents |
| Construction | CNC laser cut and CNC bent |
| Vehicle | 2018-2026 Jeep Wrangler JL, 2-door and 4-door |
Vehicle fitment
It is for the 2018-2026 Jeep Wrangler JL, covering 2-door and 4-door bodies. Confirm your vehicle’s year, model and trim before ordering.
Earlier Wrangler generations such as the JK and TJ fall outside the 2018-2026 JL range. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A solid front inner fender is included. Check the package contents against your installation before starting.


















