Overview
The Artec Industries JL5108 is a vented front inner fender for the 2018 Jeep Wrangler JL, 2 and 4 door models. It is a 1/16-inch aluminum liner with no shock cutout, designed to shield the engine compartment from dirt and debris while allowing the use of larger tires.
It was tested with no lift and 37-inch tires. The panel is CNC laser cut and CNC bent for a precise fit, uses a proprietary A-blade stamping process, and is made in-house in the USA. It can be trimmed for coilover setups and works with a trimmed OEM fender.
Key features
- Vented design with no shock cutout
- 1/16-inch aluminum construction
- CNC laser cut and CNC bent for precise fit
- Proprietary A-blade stamping process adds rigidity.
- Tested with no lift and 37-inch tires
- Can be trimmed for coilover use and works with a trimmed OEM fender
Vented liners and airflow
A vented front inner fender keeps the engine bay open to airflow while still covering the area around the shock and steering parts. Airflow can help keep components from trapping heat, but openings also let spray and grit in. Owners who run the vehicle through deep water or mud should plan to clean the engine bay more often than they would with a closed liner.
Before choosing this type, consider how the vehicle is used. Daily drivers in dry climates may not need much more than basic splash protection, while trail rigs often benefit from stronger shielding. Whichever design you choose, check that the liner clears the tire at full lock and that the mounting points line up with the body before final tightening.
- Clean mud and grit from the engine bay after wet runs
- Check that wiring and hoses sit clear of the vents
- Confirm tire clearance at full steering lock
- Inspect the mounting points after rough trail use
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | JL5108 |
| UPC | 816791028679 |
| Material | Aluminum |
| Thickness | 1/16-inch |
| Design | Vented, no shock cutout |
| Construction | CNC laser cut and CNC bent |
| Stamping | Proprietary A-blade process |
| Manufacturing | Made in-house in the USA. |
Vehicle fitment
It fits the 2018 Jeep Wrangler (JL) in the Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims.
Wrangler JK and TJ models sit outside this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Trimming is only needed for coilover builds. Mark the cut line and check clearance before cutting.
What’s included
A vented front inner fender is included. Check the package contents against part number JL5108 on arrival.


















