Overview
The Fox Racing Shox 2.0 Performance Series reservoir shock, part number 985-24-015, is a front-position shock with an external reservoir and 9.6 inch travel. It fits 2WD and 4WD drivetrains, with an extended length of 24.80 inch and a collapsed length of 15.20 inch.
The shock body is metal-impacted aluminum, which dissipates heat faster than conventional steel. An internal floating piston separates the shock oil from a high-pressure nitrogen gas chamber, giving a steady ride on rough roads.
Key features
- Metal-impacted aluminum body that Fox says sheds heat faster than steel
- Internal floating piston separates oil from a nitrogen gas chamber
- External reservoir for the front mounting position
- 9.6 inch travel with 24.80 inch extended and 15.20 inch collapsed lengths
- Fits 2WD and 4WD drivetrains
Mounting an external reservoir
An external reservoir shock moves extra oil and gas volume into a separate canister, which keeps the main body cooler and gives the damping more capacity for hard use. The reservoir needs room to sit clear of tires, brackets, and steering components through full travel, so check its position before tightening the lower mount.
Keep the hose or reservoir line free of sharp edges and away from exhaust heat. Gas-charged shocks should not be heated or opened. After installation, cycle the suspension by hand to confirm the reservoir does not rub or pinch at any point in its travel.
- Route the reservoir clear of tires and steering parts
- Check clearance at full compression and full droop
- Inspect the reservoir mount after rough trail use
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-015 |
| UPC | 70000617865 |
| Series | 2.0 Performance Series reservoir shock |
| Mounting location | Front |
| Reservoir | External |
| Body material | Metal-impacted aluminum |
| Travel | 9.6 inch |
| Extended length | 24.80 inch |
| Collapsed length | 15.20 inch |
| Drive type | 2WD and 4WD |
| Quantity | Each |
Vehicle fitment
No vehicle is named for part number 985-24-015. Compare the front mounting points and the 24.80 inch extended length with the shock you are replacing.
Check your year, make, model and trim before buying, and compare the front mounts and the 24.80 inch extended length with the shock you are replacing.
Installation notes
Because this shock has an external reservoir, mount the reservoir where it has room to clear moving suspension parts. Gas-charged shocks hold pressurized gas, so do not heat or open the body.
What’s included
One shock is included, sold as each. The external reservoir is part of the design.
Not included: Check whether mounting hardware is needed for your installation before starting.








