Overview
The Fox Racing Shox 2.5 Factory Series reservoir shock set, part 883-24-020, is a set of hydraulic, gas-charged direct replacement shocks. Extended length is 24.6 in, collapsed length is 15.350 in, and stroke is 9.25 in.
The set is designed to replace original shocks in existing suspensions. The vehicles it suits are unknown from this part number.
Key features
- Fox 2.5 Factory Series reservoir design
- Hydraulic, gas-charged operation
- 9.25 in stroke
- Direct replacement design
Replacing shocks in a set
A shock set is usually sold to replace the original shocks on an axle or across a suspension, so the new units should match each other closely. Matched shocks give a predictable ride and keep the body from leaning more on one side than the other. Replacing only one worn shock can leave the two sides feeling different.
Gas-charged reservoir shocks often hold their damping well when kept clean, but seals, mounts and bushings still wear over time. Before fitting a set, compare the extended and collapsed lengths with the originals, check the eye sizes, and confirm the bolt-in points line up. Work through one corner at a time so the vehicle stays supported and the other side remains a reference.
- Compare lengths with each original shock
- Check mounts and eye sizes before fitting
- Work one corner at a time
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 883-24-020 |
| UPC | 700007031081 |
| Series | Fox 2.5 Factory Series |
| Type | Reservoir shock set |
| Operation | Hydraulic, gas charged |
| Extended length | 24.6 in |
| Collapsed length | 15.350 in |
| Stroke | 9.25 in |
Vehicle fitment
Fit is unknown for this shock set. It is a direct-fit design, so compare its lengths with the shocks you are replacing before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The number of shocks in the set and any included hardware are unknown. Review the package contents against your installation before starting.








