Overview
The Fox Racing Shox 2.0 Performance Series Smooth Body IFP Shock, part number 985-24-004, is a hydraulic, gas-charged shock with a bushing mount and black aluminum construction. It is listed with an extended length of 22.65 inch and a collapsed length of 14.55 inch.
This smooth body line comes in several sizes and can be valved to suit driving conditions. The mount is 2.0 X 8.0 with no unit, so confirm that dimension against your bracket before fitting. It carries a Universal Fit label, so the lengths and mount decide whether it suits a given vehicle.
Key features
- Smooth body IFP shock in the 2.0 Performance Series
- Bushing mount, 2.0 X 8.0
- Black aluminum construction
- Extended 22.65 inch and collapsed 14.55 inch lengths
- Hydraulic, gas-charged design
Valving and suspension geometry
A smooth body shock keeps its damping inside a plain outer body, which gives a clean look and a simple mounting profile. Valving controls how quickly oil moves through the shock, so adjusting it changes how the suspension responds to bumps, rough ground and highway speeds. Gas charging helps keep the oil from foaming under hard use, which supports consistent damping over long runs.
Shock length and mount spacing matter as much as valving. Compare the extended and collapsed lengths with the suspension travel and the mounting points before choosing a size. Upper and lower bushings should be inspected at the same time, since worn bushings can change the shock angle and alter how the damping feels.
- Check the mount spacing before ordering
- Inspect bushings for cracking
- Compare shock length with suspension travel
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-004 |
| UPC | 70000617854 |
| Series | 2.0 Performance Series Smooth Body IFP |
| Mount | Bushing mount, 2.0 X 8.0 |
| Material | Black aluminum |
| Extended length | 22.65 inch |
| Collapsed length | 14.55 inch |
| Design | Hydraulic, gas charged |
Vehicle fitment
No vehicle, year or chassis code is identified for 985-24-004. It carries a Universal Fit label.
Compare the 22.65 inch extended and 14.55 inch collapsed lengths with your suspension’s mounting points before deciding. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the listed 2.0 X 8.0 mount matches your bracket before removing the old shock. Use jack stands and wheel chocks while the suspension is open, since the shock is a load-bearing part of the suspension.
What’s included
No accessories come with it.
Not included: Mount bushings, brackets and fasteners are not confirmed as part of the package.









