Overview
The Fox Racing Shox 985-24-081 is a 2.0 Performance Series smooth body IFP shock with an aluminum body. Its extended length is 24.05 inch, its collapsed length is 14.95 inch and its stroke is 9.1 inch.
It is a hydraulic, gas-charged direct fit shock with a 24.05 inch extended length. Confirm fit for your vehicle before ordering, and check the 14.95 inch collapsed length and 9.1 inch stroke against the shock you are replacing.
Key features
- Aluminum smooth body
- IFP (internal floating piston) design
- 24.05 inch extended length and 14.95 inch collapsed length
- Hydraulic, gas-charged construction
Working through a shock swap
Swapping a shock is easier when the job is planned. Start by noting how the current unit mounts, including the eye style, bushing type and any spacers. Then clean the mounting points so the new shock seats squarely. A shock that sits even slightly off can load the eyes unevenly and wear bushings faster than expected.
IFP designs keep the oil and gas charge separated, which supports steady damping through repeated compression. Gas-charged shocks are under pressure, so store them upright and keep them away from open flame during handling. After installation, drive a short loop at low speed and listen for knocking at the mounts, which can point to a loose or misaligned fitting.
- Note the mount style before removal
- Clean the mounting surfaces before fitting
- Recheck fasteners after the first drive
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-081 |
| UPC | 700007193825 |
| Series | 2.0 Performance Series |
| Body | Aluminum, smooth body |
| Design | IFP (internal floating piston) |
| Construction | Hydraulic / gas charged |
| Extended length | 24.05 inch |
| Collapsed length | 14.95 inch |
| Stroke | 9.1 inch |
Vehicle fitment
This shock has no vehicle application attached, so verify it by year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 24.05 inch extended and 14.95 inch collapsed lengths with your current shock before fitting the new one.
What’s included
Gather the fasteners and brackets your setup needs before you begin.








