Overview
The Fox Racing Shox 980-24-656 is a 2.0 Performance Series IFP rear shock absorber for 4WD rear suspension. It is a direct replacement, bolt-on shock with an internal reservoir, a 2.0 in body and a 5/8 in shaft diameter, finished in black and aluminum.
Fox direct replacement shocks are offered for hundreds of applications, from stock to lifted vehicles. Fox engineers test each application to maximize suspension travel and performance on and off the road.
Key features
- Internal reservoir design
- Direct replacement, bolt-on mounting in the OEM style
- 2.0 in body diameter
- 5/8 in shaft diameter
- Black and aluminum finish
- Designed for the 4WD rear position
- It is a hydraulic, gas charged shock in the 2.0 Shock Series.
Choosing a 4WD rear shock
Rear shocks carry much of the load when a 4WD truck brakes, accelerates and crosses uneven ground. A replacement with an internal reservoir gives the damper more room to shed heat during long trail sections. Check that the shaft and body sizes you need match the old shock, because a mismatch can leave the suspension bottoming or binding.
Replacement shocks are often swapped in pairs on the same axle, so both sides keep similar damping. When the old unit is worn, look for fluid on the body, a loose mounting bushing, or a bounce that keeps going after a bump. Rear suspension components such as bump stops and springs wear alongside shocks, so inspect them at the same time and replace what is worn.
- Measure the old shock before ordering
- Replace in pairs on the same axle
- Inspect bushings and mount hardware
- Check bump stops for wear
- Tighten mounts to the vehicle’s service specification
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-656 |
| UPC | 70000618087 |
| Shock series | 2.0 Performance Series, 2.0 Shock Series |
| Type | Hydraulic / gas charged |
| Position | 4WD rear |
| Body diameter | 2.0 in |
| Shaft diameter | 5/8 in |
| Finish | Black and aluminum |
| Reservoir | Internal reservoir |
| Mounting | OEM direct replacement mounting |
| Travel | Application specific |
| Extended length | Application specific |
| Collapsed length | Application specific |
Vehicle fitment
It is built for the 4WD rear position in the 2.0 Shock Series, with a 2.0 in body and a 5/8 in shaft.
Confirm your vehicle’s year, model and trim before ordering. Check that the length range suits your application before installing.
Installation notes
It is a direct replacement shock with bolt-on mounting, so it takes the place of the original unit at the existing mounts. Travel and lengths depend on the application, so compare the collapsed and extended lengths with your vehicle’s requirements before installing. Shock absorbers are under pressure, so have a qualified technician handle installation.
What’s included
The product is one Fox Racing Shox 980-24-656 shock absorber, as titled.
Not included: Hardware and additional parts, sold separately.









