Overview
The Fox Racing Shox 2.0 Performance Series IFP shock, part number 980-24-967, is a single front shock with an internal reservoir for 2WD and 4WD front suspensions. It is a direct replacement, bolt-on shock built with a smooth body and a gas charged design.
Fox says these direct replacement shocks are tested by its engineers to maximize suspension travel and performance on and off the road. The company describes them as available in hundreds of applications, from stock to lifted, as well as aftermarket kit replacements.
Key features
- Direct replacement, bolt-on design for front suspension
- Performance Series smooth body construction
- Internal reservoir design
- Single shock configuration
- Gas charged, hydraulic operation
- It works in both 2WD and 4WD front suspensions.
- Each application was tested by Fox engineers for suspension travel and performance
Choosing the right shock
A front shock controls how the axle moves over bumps and how the body settles under braking and steering. When choosing a replacement, compare the shock’s travel and collapsed length against the one you are removing, since small differences change ride height and how far the suspension can flex. Match the mounting arrangement, including eye and stud sizes, before ordering.
Front shocks are often replaced with matching bushings and hardware, as the upper and lower mounts take a lot of movement. Examine rubber bushings for cracks and metal mounts for elongated holes, and check the bolts after the first few drives. Worn mounts can make a new shock feel loose, so address them at the same time.
- Compare collapsed length before ordering
- Inspect upper and lower mounts
- Replace shocks in pairs for even handling
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Product line | 2.0 Performance Series |
| Part number | 980-24-967 |
| UPC | 70000617087 |
| Type | Single shock with internal reservoir |
| Body | Smooth body |
| Charge | Gas charged, hydraulic |
| Extended length | 25.61 in |
| Collapsed length | 16.67 in |
| Travel | 8.9 in |
| Position | Front |
| Drivetrain | 2WD and 4WD |
Vehicle fitment
Match your vehicle’s year, model and chassis code to the application before buying. It is a front shock for 2WD and 4WD front suspensions.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
This is a single shock unit. Check the package contents for hardware, since mounts and fasteners may be needed for installation.









