Overview
The Fox Racing Shox 980-24-942 is a 2.0 Performance Series smooth body IFP shock with an internal reservoir, made for 4WD front use. Its extended length is 24.65 inch, collapsed length 15.55 inch and travel 9.1 inch.
It is a hydraulic, gas-charged single shock. No vehicle is named for this part, so confirm fit for your 4WD truck or SUV before buying.
Key features
- Smooth body IFP design
- Internal reservoir
- 4WD front position
- Hydraulic, gas-charged construction
- Travel 9.1 inch
Front position checks
On a 4WD truck, the front shocks handle steering loads, braking dive and uneven ground at the wheel. A shock with an internal reservoir keeps its gas and oil apart from the body, which helps damping hold up under sustained heat. Those properties matter most on steep trail descents and long highway grades with a loaded bed.
Before replacing, check the rest of the front end. Worn ball joints, tie rod ends and control arm bushings change how the shock moves and can wear a new unit unevenly. Look at the mounting eyes for cracked rubber and make sure the bolts are tightened properly after installation. Keep the shock upright during storage so its seals stay wetted.
- Check the upper and lower mounts for wear
- Inspect for oil around the shaft
- Recheck mount bolts after the first drive
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-942 |
| UPC | 70000618098 |
| Series | 2.0 Performance Series |
| Design | IFP, smooth body |
| Reservoir | Internal |
| Position | 4WD front |
| Type | Single |
| Construction | Hydraulic / gas charged |
| Extended length | 24.65 inch |
| Collapsed length | 15.55 inch |
| Travel | 9.1 inch |
Vehicle fitment
Confirm fit for your 4WD front suspension, including year, model and trim, before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 24.65 inch extended and 15.55 inch collapsed lengths with the front shock you are replacing before ordering.
What’s included
It is a single shock, so plan the order around the number of shocks your front suspension needs.







