Overview
The Fox Racing Shox 985-24-010 is a 2.0 Series emulsion shock with a 2.0 inch body and 12 inch of travel. It is a gas charged, non-reservoir shock with a stem top and bushing mount, finished in black and aluminum.
Fox smooth body shocks come in many sizes and features, and they can be valved for a vehicle’s specific driving needs. Fox designs its shocks for high performance and has built them for 30 years. Among the smooth body sizes, this 2.0 Series shock has a 2.0 inch body, so match the body diameter and mount style to your application before ordering.
Key features
- 2.0 inch body diameter
- 12 inch travel
- 5/8 inch shaft diameter
- Gas charged, non-reservoir design
- Stem top and bushing mount
- Black and aluminum finish
Shock tuning and setup
Damping controls how quickly a shock compresses and rebounds, and that rate changes how the vehicle feels on pavement, washboard and rocks. A shock that is valved for a light vehicle can feel harsh or floaty when loaded, so think about weight, tire size and typical terrain before choosing a setup. Non-reservoir designs keep the body compact, which can help with clearance around the axle or frame.
Mounts wear over time. Stem top and bushing mounts depend on the bushing to absorb movement, so check for cracks, splitting or play at each end. Replace the bushings and hardware together when either end is worn, and keep the mounting bolts at the correct torque. Dirt and water can work into the shaft seal, so wipe the shaft after off-road use.
- Choose valving based on load and terrain
- Check the stem top bushing for play
- Inspect the shaft for pitting or dirt build-up
- Look for oil film on the shock body
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-010 |
| UPC | 70000617860 |
| Shock series | 2.0 Series |
| Body diameter | 2.0 in |
| Travel | 12 in |
| Shaft diameter | 5/8 in |
| Extended length | 31.05 in |
| Collapsed length | 18.95 in |
| Reservoir | None |
| Charge | Gas charged |
| Mount | Stem top and bushing |
| Finish | Black and aluminum |
Vehicle fitment
Confirm the 18.95 inch collapsed and 31.05 inch extended lengths against your mounting points before ordering. Match the stem top and bushing mount to the vehicle’s mounting points.
Installation notes
The stem top and bushing mount determines how the shock attaches, so confirm that mount type matches the mounting points on your vehicle.









