Overview
The Fox Racing Shox 980-24-675 is a 2.0 Performance Series IFP shock sold as a direct replacement bolt-on unit, with a 2.0-inch body and a 5/8-inch shaft. It is a gas-charged hydraulic shock whose Internal Floating Piston separates the shock oil from a nitrogen gas chamber.
Direct replacement shocks in this line are designed for applications from standard to lifted vehicles, and each application is built to maximize travel on and off road. Application for this part number is 2WD and 4W.
Key features
- Bolt-on direct replacement design
- Internal Floating Piston with nitrogen gas chamber
- Internal reservoir
- Aluminum body with black finish
- 2.0-inch body diameter and 5/8-inch shaft
- Noted for 2WD and 4W applications
Bolt-on swap checklist
A bolt-on shock swap is simpler when the old unit is measured before it comes off. Record the mounted length, the compressed length and the orientation of the eye ends, then support the vehicle securely before loosening any fasteners. Keeping the old hardware in order makes it easier to spot worn bushings or damaged threads.
Gas-charged shocks hold nitrogen under pressure, so avoid heating the body, cutting into it or drilling near the seal. Once the new unit is in place, recheck the fasteners after the first few drives, since bushings and mounts can settle. Dispose of the old shock through a facility that accepts gas-charged dampers.
- Measure the old unit’s mounted and compressed lengths
- Replace worn mount bushings during the swap
- Tighten fasteners to the vehicle’s service values
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-675 |
| UPC | 70000618096 |
| Series | 2.0 Performance Series |
| Shock type | Hydraulic, gas charged |
| Body diameter | 2.0 inch |
| Shaft size | 5/8-inch diameter |
| Finish | Black and aluminum |
| Travel | Application specific |
| Extended length | Application specific |
| Collapsed length | Application specific |
| Reservoir | Internal |
| Mounting | Direct replacement, bolt-on |
| Application | 2WD and 4W |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check the mounting points and installed length against your original shock.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Since this is a bolt-on direct replacement, match the mounting points and installed length of your original shock to this unit before you remove the old one.
What’s included
Check the package contents before starting, including any mounting hardware you may need.
Not included: Any mounting hardware you may need, plus the Sold Separately item, which is sold apart from this shock.








