Overview
The Fox 980-24-673 is a 2.0 Performance Series IFP shock with a black and aluminum finish and a 2.0 in body diameter. It has an internal reservoir and is listed with OEM direct replacement mounting for 2WD and 4WD applications.
Travel, extended length and collapsed length depend on the application, so measure your original shock and match its mounting and dimensions before ordering.
Key features
- Internal reservoir design
- Black and aluminum finish
- OEM direct replacement mounting
- 5/8 in shaft diameter
- 2WD and 4WD applications named
Reservoir shock setup
An internal reservoir sits inside the shock body, so the extra oil and gas volume stays in one unit rather than a remote canister. That keeps hose routing simple and gives the damper room to handle heat during repeated suspension cycling. Reservoir shocks are often chosen for trail driving where heat builds on long sections.
Because travel depends on the application, size the shock from your own vehicle’s measurements. Check the bushing or eye style, the shaft diameter and the mounting bolts before assembly. Bump stops and bushings are often replaced together, since worn mounts can make a new shock wear faster.
- Measure the shock being removed end to end
- Check shaft diameter against your hardware
- Inspect bushings for cracking
- Clean threads before reinstalling bolts
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-673 |
| UPC | 70000618094 |
| Series | 2.0 Performance Series |
| Finish | Black and aluminum |
| Body diameter | 2.0 in |
| Shaft diameter | 5/8 in |
| Reservoir | Internal |
| Mounting | OEM direct replacement |
| Drive | 2WD and 4WD |
| Travel | Application specific |
| Extended length | Application specific |
| Collapsed length | Application specific |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. The 2WD and 4WD designation covers drive type only.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Since lengths and travel depend on the application, measure the shock being replaced before choosing this part. Check the 5/8 in shaft diameter against your mounting hardware as well.
What’s included
One shock is described, and it is marked Sold Separately.
Not included: Check the package contents before fitting.









