Overview
The Fox Racing Shox 985-26-105 is a rear reservoir shock from the Fox 2.0 Factory Series with a smooth body and CD adjuster. It is a direct replacement for the original rear shock on 1999–2017 Ford F-250 and F-350 Super Duty trucks, with a 1.5 to 3.5 in. lift rating.
The shock combines a smooth body reservoir with a CD adjuster, the two design features in its name. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Smooth body reservoir construction
- CD adjuster
- Direct fit replacement design
- Rear position
- Rated for 1.5 to 3.5 in. of lift
Lift and ride height
The 1.5 to 3.5 in. rating suits trucks with a moderate lift. Before installing, measure the current rear height and confirm it falls in that span. A rear shock used outside its range can bottom out on bumps or run out of extension on articulation.
Rear shock upkeep is straightforward: check for seepage at the body, inspect the bushings each time the tires come off, and look for cracked or rusted mounts. Off-road use over rocks and ruts can damage mounting points, so inspect after hard trips. A worn rear shock often shows up as bounce after a dip or a slight sway in turns.
- Measure rear height against the lift range
- Inspect rubber bushings at tire rotation
- Check mounts after rough trail use
- Confirm shock and spring condition together
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-26-105 |
| UPC | 700007189935 |
| Series | Fox 2.0 Factory Series |
| Body style | Smooth body reservoir with CD adjuster |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | 1.5 – 3.5 in. |
Vehicle fitment
It fits the 1999–2017 Ford F-250 Super Duty and 1999–2017 Ford F-350 Super Duty, in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims.
Other Super Duty generations and Ford F-150 models are absent from this fitment data. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It installs as a bolt-on swap in the original rear location. Measure your current suspension height and confirm it falls within 1.5 to 3.5 in. before installing.
What’s included
Check the package contents against your installation before starting, including any mounting hardware you may need.









