Overview
The Fox Racing Shox 2.0 Performance Series coilover IFP shock, part 985-02-007, is a single unit for the 4WD front position. It has 5.5 in of travel and a collapsed length of 17.55 in.
The extended length is 2303 inch, so verify that measurement against your current unit before fitting. It is designed as a direct-fit replacement.
Key features
- Coilover IFP design
- 5.5 in travel
- Gas-charged hydraulic operation
- Direct-fit replacement design
Care and inspection
A coilover shock works with its spring as one unit, so the two need to be considered together. The spring sets the ride height and load, while the shock controls how quickly the wheel moves after a bump. Keeping both in good shape keeps the front end predictable on and off the road.
Inspect the body for oil seepage at the seals, since a leak means the damping is losing its control. Look at the upper and lower mounts for cracked rubber or worn bushings, and check that fasteners are snug after the first few drives. Replace a shock that leaks or feels loose rather than adding more load to it.
- Wipe the shaft clean after mud or water crossings
- Look for dents on the body or damage to the shaft
- Check spring seats and retainers during service
- Replace worn bushings before they affect alignment
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-02-007 |
| UPC | 70000617849 |
| Series | Fox 2.0 Performance Series |
| Type | Coilover IFP shock |
| Quantity | Each |
| Extended length | 2303 inch |
| Collapsed length | 17.55 inch |
| Travel | 5.5 inch |
| Position | 4WD front |
| Operation | Hydraulic, gas charged |
Vehicle fitment
Year, make and model are not tied to this shock. Since it is for the 4WD front position and the extended length needs checking, compare the measurements with your current unit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents for springs and mounting hardware before starting the installation.







