Overview
The Fox Racing Shox 2.0 Performance Series IFP Shock, part number 980-24-652, is a direct replacement shock with an internal reservoir, designed for OEM-style mounting. It has a black and aluminum finish, a 2.0 inch body diameter and a 5/8 inch shaft diameter. Travel and extended and collapsed lengths are application specific.
Direct replacement shocks of this type are designed for many applications, and each application is tuned for travel and performance. This unit is set up for the 4WD front position.
Key features
- 2.0 Performance Series IFP design with internal reservoir
- Black and aluminum finish
- 2.0 inch body diameter and 5/8 inch shaft diameter
- OEM direct replacement mounting
- Set up for the 4WD front position
- Travel and lengths are application specific
Front shock service notes
Front shocks handle steering-related movement and absorb impacts from the front axle, so they see a different load pattern than rear units. An internal floating piston keeps oil apart from the gas charge, which supports consistent damping as the shock heats up. Keeping the body clean and checking the shaft seal after each trail session helps the front end stay controlled.
Look for oil seepage on the shaft, a noisy rebound, or play in the mounts when the wheel is moved by hand. Torque fasteners to the specified values in your service manual and retighten after the first few drives. When replacing a front shock, a matched set on both sides keeps steering feel and ride height even.
- Clean the shaft after mud and sand
- Check for seepage at the shaft seal
- Look for play in the upper and lower mounts
- Retighten fasteners after early drives
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-652 |
| UPC | 70000559080 |
| Series | 2.0 Performance Series |
| Type | IFP shock with internal reservoir |
| Finish | Black and aluminum |
| Body diameter | 2.0 inch |
| Shaft diameter | 5/8 inch |
| Travel | Application specific |
| Extended and collapsed length | Application specific |
| Mounting | OEM direct replacement |
Vehicle fitment
No vehicle is confirmed for this part, and no model year or chassis is named. The 4WD front position is the only one covered, so check your application before ordering.
Because travel and length depend on the application, measurements cannot be matched to a vehicle here. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Not included: Supplied separately from other items.








