Overview
The Banks Power 42215 is a Ram-Air intake system supplied with its filter, housing, ducting, intake pieces, clamps and hardware. It is a cold air intake with a full filter enclosure, an oil filter and an inlet tube.
The system is rated for up to 66% more flow than factory parts. A giant outlet and streamlined components work with an enclosed cold-air box that keeps hot engine air out of the intake. The lifetime air filter needs fewer cleanings than many competing filters.
The five-bellow connection accommodates engine movement and helps protect components over time. The design is intended not to trigger fault or error codes.
Key features
- Ram-Air design with enclosed cold-air box
- Full filter enclosure with oil filter
- Inlet tube included
- Complete kit with ducting, intake pieces, clamps and hardware
- Lifetime air filter that needs fewer cleanings.
Airflow basics for cold-air intakes
A cold-air intake draws air from a location away from the hot engine compartment, which keeps the intake air cooler and denser. The effect depends on the vehicle, the tune and driving conditions, so the gain on any given truck will vary. Clean, sealed routing matters as much as the intake design itself.
Oil-type filters need periodic service to keep airflow even. Keep the element clean and correctly oiled, and check the housing seal when the system is opened. Pay attention to the inlet tube and enclosure after rough trail use, since loose joints can let dust reach the filter from the wrong side.
- Keep the filter element clean and lightly oiled
- Check the housing seal whenever the system is opened
- Watch for loose joints after rough trail use
Specifications
| Brand | Banks Power |
|---|---|
| Part number | 42215 |
| UPC | 801279422155 |
| Intake type | Cold Air |
| Filter housing type | Full Enclosure |
| Filter type | Oil |
| Inlet tube | Included |
| Included | Filter, housing, ducting, intake pieces, clamps and hardware |
| Fitment type | Direct Fit |
Vehicle fitment
The 42215 is a Direct Fit kit without a specific year, make or model attached.
Match your truck’s year, model and trim against the kit before buying.
Installation notes
The clamps and hardware are included, so use the supplied fasteners when assembling the intake, and check that all joints are tight before starting the engine.
What’s included
The filter, housing, ducting, intake pieces, clamps, hardware and inlet tube are named as included.









